English
Language : 

TLC59282_15 Datasheet, PDF (7/24 Pages) Texas Instruments – 16-Channel, Constant-Current LED Driver with 4-Channel Grouped Delay
TLC59282
www.ti.com
TERMINAL
NAME DBQ
RGE
SIN
2
23
SCLK
3
24
LAT
4
1
BLANK
21
18
IREF
23
20
SOUT
22
19
OUT0
5
2
OUT1
6
3
OUT2
7
4
OUT3
8
5
OUT4
9
6
OUT5
10
7
OUT6
11
8
OUT7
12
9
OUT8
13
10
OUT9
14
11
OUT10
15
12
OUT11
16
13
OUT12
17
14
OUT13
18
15
OUT14
19
16
OUT15
20
17
VCC
24
21
GND
1
22
SBVS152C – DECEMBER 2010 – REVISED OCTOBER 2011
TERMINAL FUNCTIONS
I/O
DESCRIPTION
I
Serial data input for driver on/off control; Schmitt buffer input. When SIN is high, data '1' are
written into the LSB of the 16-bit shift register at the SCLK rising edge.
I
Serial data shift clock; Schmitt buffer input. All data in the 16-bit shift register are shifted toward
the MSB by 1-bit synchronization of SCLK.
Level triggered latch; Schmitt buffer input. The data in the 16-bit shift register continue to transfer
to the output on/off data latch while LAT is high. Therefore, if the data in the 16-bit shift register
I are changed when LAT is high, the data in the data latch are also changed. The data in the data
latch are held when LAT is low. This pin is internally pulled down to GND with a 500 kΩ (typ)
resistor.
Blank, all outputs; Schmitt buffer input. When BLANK is high, all constant-current outputs
I
(OUT0–OUT15) are forced off. When BLANK is low, all constant-current outputs are controlled by
the data in the output on/off data latch. This pin is internally pulled up to VCC with a 500 kΩ (typ)
resistor.
I/O
Constant-current value setting, OUT0–OUT15 sink constant-current is set to desired value by
connection to an external resistor between IREF and GND.
O
Serial data output. This output is connected to the MSB of the 16-bit shift register. SOUT data
changes at the rising edge of SCLK.
O
Constant-current output. Each output can be tied together with others to increase the
constant-current. Different voltages can be applied to each output.
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
O Constant-current output
— Power-supply voltage
— Power ground
Copyright © 2010–2011, Texas Instruments Incorporated
Product Folder Link(s): TLC59282
Submit Documentation Feedback
7