SLOU330 Datasheet, PDF (7/18 Pages) Texas Instruments – EVM Description

www.ti.com
Initial EVM Setup and Basic Test Procedure
Table 2. Clock Delays for Listed DAC Sampling Rates
DAC Sampling Rate
130Msps
122.88Msps
100Msps
80Msps
65Msps
40Msps
Suitable Clock Delay
0ps to 900ps
0ps to 900ps
0ps to 1.2ns
0ps to 1.8ns
0ps to 2.1ns
0ps to 2.1ns
The general setup tab includes
controls for the digital TX interface
This section controls the setup of the digital
interface as well as the TX interpolation
For TX the output data of the TSW3100 needs to be properly configured for 6x serialization using Matlab.
1. Install Matlab runtime engine (MCRInstaller.exe)
2. Open one of the executable (.exe) TSW3100 GUIs – ‘TSW3100_MultitonePattern_v2p7.exe
3. Enter DAC sampling rate
4. Enter tone frequencies
SLOU330 – December 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated
EVM Description
7