DRV2605L-Q1 Datasheet, PDF (60/67 Pages) Texas Instruments – Automotive Haptic Driver for LRA and ERM

DRV2605L-Q1
SLOS874A – OCTOBER 2015 – REVISED OCTOBER 2015
www.ti.com
Device Support (continued)
EFFECT ID
NO.
WAVEFORM NAME
34
Short Double Sharp Tick 1 – 100%
35
Short Double Sharp Tick 2 – 80%
36
Short Double Sharp Tick 3 – 60%
37
Long Double Sharp Click Strong 1 –
100%
38
Long Double Sharp Click Strong 2 –
80%
39
Long Double Sharp Click Strong 3 –
60%
40
Long Double Sharp Click Strong 4 –
30%
41
Long Double Sharp Click Medium 1 –
100%
EFFECT
ID NO>
75
76
77
78
79
80
81
82
WAVEFORM NAME
Transition Ramp Down Short Smooth 2 –
100 to 0%
Transition Ramp Down Long Sharp 1 – 100
to 0%
Transition Ramp Down Long Sharp 2 – 100
to 0%
Transition Ramp Down Medium Sharp 1 –
100 to 0%
Transition Ramp Down Medium Sharp 2 –
100 to 0%
Transition Ramp Down Short Sharp 1 – 100
to 0%
Transition Ramp Down Short Sharp 2 – 100
to 0%
Transition Ramp Up Long Smooth 1 – 0 to
100%
EFFECT ID
NO.
116
117
118
119
120
121
122
123
WAVEFORM NAME
Transition Ramp Up Short Sharp 1 – 0 to 50%
Transition Ramp Up Short Sharp 2 – 0 to 50%
Long buzz for programmatic stopping – 100%
Smooth Hum 1 (No kick or brake pulse) – 50%
Smooth Hum 2 (No kick or brake pulse) – 40%
Smooth Hum 3 (No kick or brake pulse) – 30%
Smooth Hum 4 (No kick or brake pulse) – 20%
Smooth Hum 5 (No kick or brake pulse) – 10%
11.2 Documentation Support
11.2.1 Related Documentation
For related documentation see the following:
• Haptic Energy Consumption, SLOA194
• Haptic Implementation Considerations for Mobile and Wearable Devices, SLOA207
• LRA Actuators: How to Move Them?, SLOA209
11.3 Community Resource
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
11.4 Trademarks
E2E is a trademark of Texas Instruments.
TouchSense is a registered trademark of Immersion Corporation.
All other trademarks are the property of their respective owners.
11.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
11.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
12 Mechanical, Packaging, and Orderable Information
The following pages include mechanical packaging and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
60
Submit Documentation Feedback
Product Folder Links: DRV2605L-Q1
Copyright © 2015, Texas Instruments Incorporated