OPA316-Q1 Datasheet, PDF (6/39 Pages) Texas Instruments – 10-MHz, Rail-to-Rail Input/Output, Low-Voltage, 1.8-V CMOS Operational Amplifier

OPA316-Q1, OPA2316-Q1, OPA4316-Q1
SBOS841A – NOVEMBER 2016 – REVISED JANUARY 2017
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature (unless otherwise noted)⁽¹⁾
Supply voltage
Voltage ⁽²⁾
Signal input pins
Current ⁽²⁾
Output short-circuit⁽³⁾
Common-mode
Differential
T_A
Operating temperature
T_J
Junction temperature
T_stg
Storage temperature
MIN
(V–) – 0.5
–10
–55
–65
MAX
7
(V+) + 0.5
(V+) – (V–) + 0.2
10
Continuous
150
150
150
UNIT
V
V
V
mA
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input pins are diode-clamped to the power-supply rails. Current limit input signals that can swing more than 0.5 V beyond the supply
rails to 10 mA or less.
(3) Short-circuit to ground, one amplifier per package.
6.2 ESD Ratings
V_(ESD)
Electrostatic discharge
Human-body model (HBM), per AEC Q100-002⁽¹⁾
Charged-device model (CDM), per AEC Q100-011
VALUE
±4000
±750
(1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
V_S Supply voltage
Specified temperature
MIN
MAX UNIT
1.8
5.5 V
–40
125 °C
6
Submit Documentation Feedback
Copyright © 2016–2017, Texas Instruments Incorporated
Product Folder Links: OPA316-Q1 OPA2316-Q1 OPA4316-Q1