OPA314-Q1 Datasheet, PDF (6/38 Pages) Texas Instruments – 3-MHz, Low-Power, Low-Noise, RRIO, 1.8-V CMOS Operational Amplifier

OPA314-Q1, OPA2314-Q1, OPA4314-Q1
SLOS896B – DECEMBER 2014 – REVISED JANUARY 2017
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) ⁽¹⁾
Supply voltage
Voltage ⁽²⁾
Current ⁽²⁾
Output short-circuit⁽³⁾
Operating temperature, T_A
Junction temperature, T_J
Storage temperature, T_stg
Signal input terminals
Signal input terminals
MIN
MAX
7
(V–) – 0.5 (V+) + 0.5
±10
Continuous
–40
150
150
–65
150
UNIT
V
V
mA
mA
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5 V beyond the supply rails must
be current limited to 10 mA or less.
(3) Short-circuit to ground, one amplifier per package.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human body model (HBM), per AEC Q100-002⁽¹⁾
Charged device model (CDM), per AEC Q100-011
VALUE
±2000
±1000
(1) AEC Q100-002 indicates HBM stressing is done in accordance with the ANSI/ESDA/JEDEC JS-001 specification.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
V_S
Supply voltage
T_A
Ambient operating temperature
MIN
1.8 (±0.9)
–40
NOM
MAX
5.5 (±2.75)
125
UNIT
V
°C
6
Submit Documentation Feedback
Copyright © 2014–2017, Texas Instruments Incorporated
Product Folder Links: OPA314-Q1 OPA2314-Q1 OPA4314-Q1