 English |
|
|
|
|
|
|
|
| HD3SS2522 Datasheet, PDF (6/25 Pages) Texas Instruments – USB Type-C SS MUX | |||
| |||
| ◁ |
HD3SS2522
SLLSEM6B â APRIL 2015 â REVISED AUGUST 2015
www.ti.com
6.5 Electrical Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
ICC
Supply current
VCC = 3.6 V,
SS_OEn, CC_OEn = GND
0.6
1 mA
I(STANDBY) Standby current
VCC = 3.3 V, SS_OEN, CC_OEn =
VCC
VBUS_FAULT#, VCONN_FAULT#, IMODE1, IMODE2, RST, RSVD, GPIO1, GPIO2
15
µA
VIT+
Positive-going input threshold
voltage
0.45 x VCC
0.75 x VCC
V
VIT-
Negative-going input threshold
voltage
0.25 x VCC
0.55 x VCC
V
Vhys
RPULL
CI
ILGK
nput voltage hysteresis (VIT+ â VITâ)
Pullup/pulldown resistor
Input capacitance
High-impedance leakage current
VCC = 3 V
Pullup: VIN = GND,
Pulldown: VIN = VCC, VCC = 3 V
VIN = GND or VCC
VIN = GND or VCC, VCC = 3 V,
Pullup/Pulldown disabled
0.3
1
V
20
35
50
kΩ
5
pF
±50
nA
VCTRL1, VCTRL2, VBUS_EN
VOL
Low-level output voltage
MODE_LED
VOH
High-level output voltage
VOL
Low-level output voltage
AxP/N, BxP/N, CxP/N
IOL(max) = 6 mA (1)
IOH(max) = â6 mA (1)
IOL(max) = 6 mA (1)
GND + 0.3
V
VCC â 0.3
V
GND + 0.3
V
ILGK
High-impedance leakage current
CC1, CC2
VCC = 3.6 V, VIN = 0 V, VOUT = 2 V
(ILKG on open outputs Port B and C)
VCC = 3.6 V, VIN = 0 V, VOUT = 2 V
(ILKG on open outputs Port A)
130
µA
4
µA
ILGK
High-impedance leakage current
VCC = 3.6 V, VIN = 0 V,
VOUT = 0 V to 4 V
1
µA
(1) The maximum total current, IOH(max) and IOL(max), for all outputs combined should not exceed ±48 mA to hold the maximum voltage drop
specified.
6
Submit Documentation Feedback
Product Folder Links: HD3SS2522
Copyright © 2015, Texas Instruments Incorporated
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese