TMS320DM6433 Datasheet, PDF (56/271 Pages) Texas Instruments – Digital Media Processor

TMS320DM6433
Digital Media Processor
SPRS343C – NOVEMBER 2006 – REVISED JUNE 2008
www.ti.com
Table 2-24. UART0 Terminal Functions
SIGNAL
NAME
ZWT
NO.
URXD0/
GP[85]
L2
UTXD0/
GP[86]
K3
UCTS0
GP[87]
L1
URTS0
PWM0
L3
GP[88]
ZDU
NO.
M2
N1
P1
M3
TYPE ⁽¹⁾
I/O/Z
I/O/Z
I/O/Z
I/O/Z
OTHER ^{(2) (3)}
DESCRIPTION
IPU
DV_DD33
IPU
DV_DD33
IPU
DV_DD33
IPU
DV_DD33
UART0
This pin is multiplexed between UART0 (Data) and GPIO.
When used by UART0 this pin is the receive data input URXD0.
This pin is multiplexed between UART0 (Data) and GPIO.
In UART0 mode, this pin is the transmit data output UTXD0.
This pin is multiplexed between the UART0 (Flow Control) and GPIO.
In UART0 mode, this pin is the clear to send input UCTS0.
This pin is multiplexed between the UART0 (Flow Control), PWM0,
and GPIO.
In UART0 mode, this pin is the ready to send output URTS0.
(1) I = Input, O = Output, Z = High impedance, S = Supply voltage, GND = Ground, A = Analog signal
(2) IPD = Internal pulldown, IPU = Internal pullup. For more detailed information on pullup/pulldown resistors and situations where external
pullup/pulldown resistors are required, see Section 3.9.1, Pullup/Pulldown Resistors.
(3) Specifies the operating I/O supply voltage for each signal
56
Device Overview
Submit Documentation Feedback