|
BQ2083-V1P3 Datasheet, PDF (50/56 Pages) Texas Instruments – SBS-COMPLIANT GAS GAUGE IC FOR USE WITH THE bq29311 | |||
|
◁ |
bq2083-V1P3
SLVS508 â OCTOBER 2003
www.ti.com
Miscellaneous Configuration
Misc Configuration DF 0x2a contains additional bit programmable features.
b7
b6
b5
b4
b3
b2
b1
b0
IT
0
AC
DS
OT
ECLED
PHG
VOD
IT
The IT bit configures the bq2083âV1P3 to use its internal temperature sensor.
0 bq2083âV1P3 requires an external thermistor.
1 bq2083âV1P3 uses its internal temperature sensor.
AC
The AC bit enables the SAFE output to function based on the AFE integrity check.
0 SAFE not activated based on the AFE integrity check.
1 SAFE activated based on the AFE integrity check.
DS
The DS bit programs the bq2083âV1P3 to enter sleep mode on SMBus inactivity.
0 bq2083âV1P3 enters sleep mode when the SMBus is low for 2 s.
1 bq2083âV1P3 does not enter sleep mode.
OT
The OT bit programs the bq2083âV1P3 to turn off the discharge FET when the bq2083âV1P3 detects an
overtemperature condition. Charge FET is always turned off in overtemperature conditions.
0 bq2083âV1P3 does not turn off the discharge FET on overtemperature.
1 bq2083âV1P3 turns off the discharge FET on overtemperature.
ECLED
The ECLED bit programs the LED activity during charging (DSG bit = 0).
0 The LEDs are not enabled during charging.
1 The LEDs are enabled during charging.
PHG
The PHG bit configures the bq2083âV1P3 to control a precharge FET.
0 The bq2083âV1P3 does not control a precharge FET.
1 The bq2083âV1P3 may turn on or off a precharge FET according to the programmed precharge
conditions.
50
|
▷ |