|
BQ2083-V1P3 Datasheet, PDF (2/56 Pages) Texas Instruments – SBS-COMPLIANT GAS GAUGE IC FOR USE WITH THE bq29311 | |||
|
◁ |
bq2083-V1P3
SLVS508 â OCTOBER 2003
DESCRIPTION (CONTINUED)
The bq2083âV1P3 uses an integrating converter with
continuous sampling for the measurement of battery
charge and discharge currents. Optimized for coulomb
counting in portable applications, the self-calibrating
integrating converter has a resolution better than 3-nVh
and an offset measurement error of less than 1-µV
(typical). For voltage and temperature reporting, the
bq2083âV1P3 uses a 16-bit A-to-D converter. In
conjunction with the bq29311, the onboard ADC also
monitors individual cell voltages in a battery pack and
allows the bq2083âV1P3 to generate the control signals
necessary to implement the cell balancing and the
required safety protection for Li-ion and Li-polymer battery
chemistries.
The bq2083âV1P3 supports the Smart Battery Data
(SBData) commands and charge-control functions. It
communicates data using the System Management Bus
(SMBus) 2-wire protocol. The data available include the
batteryâs remaining capacity, temperature, voltage,
current, and remaining run-time predictions. The
bq2083âV1P3 provides LED drivers and a push-button
input to depict remaining battery capacity from full to empty
in 20%, 25%, or 33% increments with a 3-, 4-, or
5-segment display.
The bq2083âV1P3 contains 512 bytes of internal data
flash memory, which store configuration information. The
information includes nominal capacity and voltage,
self-discharge rate, rate compensation factors, and other
programmable cell-modeling factors used to accurately
adjust remaining capacity for use-conditions based on
time, rate, and temperature. The bq2083âV1P3 also
automatically calibrates or learns the true battery capacity
in the course of a discharge cycle from programmable near
full to near empty levels.
www.ti.com
The bq29311 AFE protection IC provides power to the
bq2083âV1P3 from a 3 or 4 series Li-ion cell stack,
eliminating the need for an external regulator circuit.
TSSOP PACKAGE
(TOP VIEW)
VIN 1
TS 2
OC 3
N/C 4
N/C 5
SCLK 6
N/C 7
VDDD 8
RBI 9
SDATA 10
VSSD 11
SAFE 12
N/C 13
N/C 14
SMBC 15
SMBD 16
DISP 17
EVENT 18
VSSD 19
38 VSSD
37 N/C
36 N/C
35 CLKOUT
34 XCK1
33 XCK2
32 FILT
31 VDDA
30 VSSA
29 VSSA
28 SR1
27 SR2
26 MRST
25 N/C
24 LED1
23 LED2
22 LED3
21 LED4
20 LED5
NC â No internal connection
AVAILABLE OPTIONS
PACKAGE
TA
38-PIN TSSOP
(DBT)
â20°C to 85°C
bq2083DBTâV1P3(1)
(1) The bq2083âV1P3 is available taped and reeled. Insert an R suffix
to the device type (e.g., bq2083DBTRâV1P3) to order tape and reel
version.
2
|
▷ |