BQ2083-V1P3 Datasheet, PDF (4/56 Pages) Texas Instruments – SBS-COMPLIANT GAS GAUGE IC FOR USE WITH THE bq29311

bq2083-V1P3
SLVS508 − OCTOBER 2003
www.ti.com
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1)
Supply voltage range, VDD relative to VSS(2)
Open-drain I/O pins, V(IOD) relative to VSS(2)
Input voltage range to all other pins, VI relative to VSS(2)
HBM
ESDS Rating CDM
MM
Operating free-air temperature range, TA
Storage temperature range, Tstg
UNIT
−0.3 V to 6 V
−0.3 V to 6 V
−0.3 V to VDD + 0.3 V
1.5 kV
1.5 kV
50 V
−20°C to 85°C
−65°C to 150°C
(1) _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) _{VSS refers to the common node of V(SSA), V(SSD), and V(SSP).}
ELECTRICAL CHARACTERISTICS
VDD = 3.0 V to 3.6 V, TA = −20°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
MAX
VDD
IDD
V(OLS)
VIL
VIH
VOL
Supply voltage
Operating current
Output voltage low: (LED1−LED5)
Input voltage low DISP
Input voltage high DISP
Output voltage low SMBC, SMBD, SDATA, SCLK,
EVENT, SAFE
VDDA and VDDD
No flash programming
I(OLS) = 10 mA
IOL = 10 mA
3.0 3.3
3.6
450
0.4
−0.3
0.8
2
VCC + 0.3
0.4
V(ILS)
Input voltage low SMBC, SMBD, SDATA, SCLK,
EVENT, SAFE
−0.3
0.8
V(IHS)
Input voltage high SMBC, SMBD, SDATA, SCLK,
EVENT, SAFE
1.7
6
V(AI)
Z(AI1)
Z(AI2)
Input voltage range VIN, TS, OC
Input impedance SR1, SR2
Input impedance VIN, TS, OC
0 V–1.0 V
0 V–1.0 V
VSS − 0.3
1.0
10
8
Power-On Reset (see Figure 1)
PARAMETER
TEST CONDITIONS
MIN TYP MAX
VIT−
Vhys
Negative-going voltage input
Power-on reset hysteresis
2.1 2.3 2.5
50 125 210
UNIT
V
µA
V
V
V
V
V
V
V
MΩ
MΩ
UNIT
V
mV
4