THS6092 Datasheet, PDF (5/23 Pages) Texas Instruments – 275mA, 12 V ADSL CPE LINE DRIBERS

THS6092, THS6093
275 mA, +12 V ADSL CPE LINE DRIVERS
SLOS345C − JANUARY 2001 − REVISED OCTOBER 2002
electrical characteristics over recommended operating free-air temperature range, T_A = 25°C,
V_CC+ = 12 V, V_CC− = GND, R_FEEDBACK = 750 Ω, R_L = 25 Ω (unless otherwise noted) (continued)
shutdown characteristics (THS6093 only)
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
VIL(SHDN) Shutdown pin voltage for power up
VCC = 12 V,
GND = 6 V
(GND Pin as Reference)
0.8 V
VIH(SHDN) Shutdown pin voltage for power down
VCC = 12 V,
GND = 6 V
(GND Pin as Reference)
2
V
ICC(SHDN)
tDIS
tEN
IIL(SHDN)
Total quiescent current when in shutdown state
Disable time (see Note 3)
Enable time (see Note 3)
Shutdown pin input bias current for power up
VSHDN = 8 V,
VCC = 12 V
VCC = 12 V
VCC = 12 V
VSHDN = 6 V,
VCC = 12 V
VGND = 6 V,
VGND = 6 V,
0.3 0.7 mA
0.2
µs
0.5
µs
40 100 µA
IIH(SHDN)
Shutdown pin input bias current for power
down
VSHDN = 9.3 V,
VCC = 12 V
VGND = 6 V,
50 100 µA
NOTE 3: Disable/enable time is defined as the time from when the shutdown signal is applied to the SHDN pin to when the supply current has
reached half of its final value.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
5