THS6092 Datasheet, PDF (3/23 Pages) Texas Instruments – 275mA, 12 V ADSL CPE LINE DRIBERS

THS6092, THS6093
275 mA, +12 V ADSL CPE LINE DRIVERS
SLOS345C − JANUARY 2001 − REVISED OCTOBER 2002
electrical characteristics over recommended operating free-air temperature range, T_A = 25°C,
V_CC+ = 12 V, V_CC− = GND, R_FEEDBACK = 750 Ω, R_L = 25 Ω (unless otherwise noted)
dynamic performance
PARAMETER
TEST CONDITIONS
VCC = 12 V
BW
Small-signal bandwidth (− 3 dB) G=1
VCC = 5 V
SR
Slew rate (see Note 2)
VCC = 12 V
VCC = 5 V
NOTE 2: Slew rate is defined from the 25% to the 75% output levels.
noise/distortion performance
PARAMETER
THD
Total harmonic distortion
(single-ended configuration)
Vn
Input voltage noise
+Input
In
Input current noise
−Input
XT
Crosstalk
TEST CONDITIONS
Gain = 4,
RL = 25 Ω,
VCC = 5 V, f = 250 kHz
VO(pp) = 2 V
Gain = 4,
RL = 25 Ω,
VCC = 12 V, f = 250 kHz
VO(pp)= 2 V
VO(pp)= 7 V
VCC = 12 V, 5 V, f = 10 kHz
VCC = 12 V, 5 V, f = 10 kHz
f = 250 kHz , VO = 2 Vpp
G = 4,
RL= 25 Ω
VCC = 5 V
VCC = 12 V
dc performance
PARAMETER
Input offset voltage
VOS
Differential offset voltage
Offset drift
− Input bias current
IIB
+ Input bias current
Differential input bias current
ZOL
Open loop transimpedance
TEST CONDITIONS
VCC = 12 V, 5 V
VCC = 12 V, 5 V
RL = 1 kΩ
TA = 25°C
TA = full range
TA = 25°C
TA = full range
TA = full range
TA = 25°C
TA = full range
TA = 25°C
TA = full range
TA = 25°C
TA = full range
VCC = 12 V, 5 V
MIN TYP MAX UNIT
100
MHz
90
600
400
V/µs
MIN TYP MAX UNIT
− 70
− 72
− 68
2.1
2.1
10.9
dBc
nV/√Hz
pA/√Hz
− 65
dBc
− 63
MIN TYP MAX UNIT
6
16
21
mV
1
6
8
20
µV/°C
3
10
12
1
6
µA
7
3
10
12
0.9
MΩ
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3