OPA333_17 Datasheet, PDF (5/42 Pages) Texas Instruments – 1.8-V, microPower, CMOS Operational Amplifiers, Zero-Drift Series

www.ti.com
OPA333, OPA2333
SBOS351E – MARCH 2006 – REVISED DECEMBER 2015
6 Specifications
6.1 Absolute Maximum Ratings
See ⁽¹⁾
Voltage
Current
Supply
Signal input terminals⁽²⁾
Signal input terminals⁽²⁾
Output short-circuit⁽³⁾
Operating junction temperature, T_J
Operating temperature, T_A
Storage temperature, T_stg
MIN
MAX
7
–0.3
(V+) + 0.3
–1
1
Continuous
150
–40
150
–65
150
UNIT
V
mA
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.3 V beyond the supply rails should
be current limited to 10 mA or less.
(3) Short-circuit to ground, one amplifier per package.
6.2 ESD Ratings
V_(ESD)
Electrostatic
discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC specification JESD22-C101⁽²⁾
VALUE
±4000
±1000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
Supply voltage, V_S
Specified temperature
MIN
MAX
UNIT
1.8
5.5
V
–40
125
°C
Copyright © 2006–2015, Texas Instruments Incorporated
Product Folder Links: OPA333 OPA2333
Submit Documentation Feedback
5