MSP430G2X32_14 Datasheet, PDF (47/61 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430G2x32
MSP430G2x02
www.ti.com
REVISION HISTORY
SLAS723H – DECEMBER 2010 – REVISED MAY 2013
REVISION
SLAS723
SLAS723A
DESCRIPTION
Initial release
Page 1, Changed Internal Frequencies up to 16 MHz With One Calibrated Frequency to Four Calibrated Frequencies
SLAS723B
Added note concerning pulldown resistor to PW14 and RSA16 pinout drawings.
Removed reference to CAOUT from N20, PW20 pinout drawing and Table 11 (there is no comparator module on this
device).
Added "N20, PW20" to Input Pin Number and Output Pin Number columns in Table 11.
Corrected pin numbers for P1.0 to P1.3 for PW14 package in Table 2.
SLAS723C
Corrected N20,PW20 Output Pin Number for TA0.0 in Table 11.
Changed Storage temperature range limit in Absolute Maximum Ratings.
Removed CAPD.y column from Table 16.
Corrected Control Bits/Signals in Table 20.
Corrected SDA pin name in Table 17.
SLAS723D
SLAS723E
Changed TAG_ADC10_1 value to 0x10 in Table 9.
Added P1.6 output row for TA0.1 module output signal TA1 in Table 11.
Changed Tstg, Programmed device, to -55°C to 150°C in Absolute Maximum Ratings.
Changed all port schematics (added buffer after PxOUT.y mux) in Pin Schematics.
SLAS723F
SLAS723G
SLAS723H
Corrected signal names on pin 7 or "N OR PW PACKAGE" (20 pin) in Device Pinouts.
Corrected pin number for P2.6 under Ouptput Pin Number, PW14 column in Table 11.
Added note for TC_REF+ in 10-Bit ADC, Built-In Voltage Reference (MSP430G2x32 Only).
Recommended Operating Conditions, Added test conditions for typical values.
Pin-Oscillator Frequency – Ports Px, Corrected resistor value in note (1).
POR, BOR, Added note (2).
Throughout, Changed all variations of touch sense⁽¹⁾ to capacitive touch.
(1) TouchSense is a trademark of Immersion Corporation.
Copyright © 2010–2013, Texas Instruments Incorporated
Submit Documentation Feedback
47