SM32C6416T-EP Datasheet, PDF (44/130 Pages) Texas Instruments – FIXED-POINT DIGITAL SIGNAL PROCESSOR

SM32C6416T-EP
FIXEDĆPOINT DIGITAL SIGNAL PROCESSOR
SGUS056A − MARCH 2005 − REVISED FEBRUARY 2006
Terminal Functions (Continued)
SIGNAL
NAME
NO.
TYPE†
IPD/
IPU‡
DESCRIPTION
EMIFA (64-bit) − DATA^||k (CONTINUED)
AED36
AB24
AED35
AB25
AED34
AC25
AED33
AC26
AED32
AD26
AED31
C26
AED30
D26
AED29
D25
AED28
E25
AED27
E24
AED26
E26
AED25
F24
AED24
F25
AED23
F23
AED22
F26
AED21
G24
AED20
G25
AED19
G23
AED18
AED17
G26
I/O/Z
IPU EMIFA external data
H23
AED16
H24
AED15
C19
AED14
D19
AED13
A20
AED12
D20
AED11
B20
AED10
C20
AED9
A21
AED8
D21
AED7
B21
AED6
C21
AED5
A22
AED4
C22
AED3
B22
AED2
B23
AED1
A23
AED0
A24
† _{I = Input, O = Output, Z = High impedance, S = Supply voltage, GND = Ground}
‡ _{IPD = Internal pulldown, IPU = Internal pullup. (These IPD/IPU signal pins feature a 30-kΩ IPD or IPU resistor. To pull up a signal to the opposite}
supply rail, a 1-kΩ resistor should be used.)
|| _{These C64x devices have two EMIFs (64-bit EMIFA and 16-bit EMIFB). The prefix “A” in front of a signal name indicates it is an EMIFA signal}
whereas a prefix “B” in front of a signal name indicates it is an EMIFB signal. Throughout the rest of this document, in generic EMIF areas of
discussion, the prefix “A” or “B” may be omitted from the signal name.
kTo maintain signal integrity for the EMIF signals, serial termination resistors should be inserted into all EMIF output signal lines.
44
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265