English
Language : 

TIOS101 Datasheet, PDF (4/26 Pages) Texas Instruments – Digital Sensor Output Drivers with Integrated Surge Protection
TIOS101
SLLSEV6 – JULY 2017
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)(2)
Supply voltage
Voltage difference
Logic supply voltage (TIOS101)
Input logic voltage
Output current
Storage temperature, Tstg
Steady state voltage for VCC and OUT
Transient pulse width < 100 µs for VCC and OUT
|V(VCC) – V(OUT)|
VCC_IN
IN, EN, ILIM_ADJ
NFAULT
MIN
MAX
UNIT
–55
55
V
–65
65
V
55
V
–0.3
6
V
–0.3
6
V
–5
5
mA
-55
170
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with reference to the GND pin, unless otherwise specified.
6.2 ESD Ratings
V(ESD)
Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC
JS-001 (1)
All pins
Contact discharge, per IEC 61000-4-2(2)(3)
Electrical fast transient, per IEC 61000-4-4(2)
Surge protection with 500 Ω, per IEC 61000-4-5;
1.2/50 μs (2)
Pins VCC, OUT
and GND
VALUE
±4000
±16000
±4000
±1200
UNIT
V
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) Minimum 100-nF capacitor is required between VCC and GND. Minimum 1-µF capacitor is required between VCC_IN/OUT and GND.
(3) Passing level is ±4500 V if the device is powered and EN=IN=HIGH.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
V(VCC)
V(VCC_IN)
RSET
1/tBIT
I(VCC_OUT)
TA
TJ
Supply voltage
3.3 V configuration
Logic level input voltage (TIOS101 only)
5 V configuration
External resistor for OUT current limit
Signaling rate (push-pull mode)
LDO output current (TIOS101-3 and TIOS101-5 only)
Operating ambient temperature
Junction temperature
MIN
NOM
MAX UNIT
7
24
36
V
3
3.3
3.6
V
4.5
5
5.5
V
0
100
kΩ
250 kbps
20
mA
–40
125
°C
150
°C
4
Submit Documentation Feedback
Product Folder Links: TIOS101
Copyright © 2017, Texas Instruments Incorporated