OPA2846_14 Datasheet, PDF (4/30 Pages) Texas Instruments – Dual, Wideband, Low-Noise, Voltage-Feedback Operational Amplifier

OPA2846
SBOS274C −JUNE 2003 − REVISED AUGUST 2008
www.ti.com
ELECTRICAL CHARACTERISTICS: V_S = ±5V (continued)
Boldface limits are 100% tested at +25°C.
R_F = 453Ω, R_L = 100Ω, and G = +10, unless otherwise noted. See Figure 1 for AC performance.
OPA2846ID
PARAMETER
Power Supply
Specified Operating Voltage
Maximum Operating Voltage
Maximum Quiescent Current
Minimum Quiescent Current
Power-Supply Rejection Ratio (−PSRR)
Thermal Characteristics
Specified Operating Range: D Package
Thermal Resistance, q_JA
D SO-8
TEST CONDITIONS
VS = ±5V, Both Channels
VS = ±5V, Both Channels
−VS = −4.5 to 5.5 (Input Referred)
Junction-to-Ambient
TYP
+25°C
MIN/MAX OVER TEMPERATURE
0°C to −40°C to
+25°C(1) +70°C(2) +85°C(2) UNITS
TEST
MIN/ LEVEL
MAX (3)
±5
V
typ
C
±6
±6
±6
V
max
A
25.2
25.9
26.3
26.7
mA
max
A
25.2
24.5
23.9
23.3
mA
min
A
95
90
88
85
dB
min
A
−40 to
+85
125
°C
typ
C
°C/W typ
C
(1) _{Junction temperature = ambient for +25°C specifications.}
(2) _{Junction temperature = ambient at low temperature limit; junction temperature = ambient +23°C at high temperature limit for over temperature}
specifications.
(3) _{Test levels: (A) 100% tested at +25°C. Over temperature limits by characterization and simulation. (B) Limits set by characterization and}
simulation. (C) Typical value only for information.
(4) _{Current is considered positive out of node. VCM is the input common-mode voltage.}
(5) _{Tested < 3dB below minimum CMRR specification at ± CMIR limits.}
4