LMH6703_16 Datasheet, PDF (4/26 Pages) Texas Instruments – 1.2 GHz, Low Distortion Op Amp with Shutdown

LMH6703
SNOSAF2E – FEBRUARY 2005 – REVISED MAY 2016
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
V_S
I_OUT
Common mode input voltage
Maximum junction temperature
Storage temperature
Soldering Information
Infrared or convection (20 sec.)
Wave soldering (10 sec.)
MIN
MAX
±6.75
See ⁽²⁾
V^−
V⁺
150
−65
150
235
260
UNIT
V
V
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The maximum output current (I_OUT) is determined by device power dissipation limitations.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Machine model (MM), per JEDEC specification JESD22-C101, all pins⁽²⁾
VALUE
±2000
±200
UNIT
V
(1) Human body model: 1.5 kΩ in series with 100 pF. JEDEC document JEP155 states that 2000-V HBM allows safe manufacturing with a
standard ESD control process. Manufacturing with less than 2000-V HBM is possible with the necessary precautions. Pins listed as
±2000 V may actually have higher performance.
(2) Machine model: 0 Ω in series with 200 pF. JEDEC document JEP157 states that 200-V MM allows safe manufacturing with a standard
ESD control process. Manufacturing with less than 200-V MM is possible with the necessary precautions. Pins listed as ±200 V may
actually have higher performance.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Operating temperature
Supply voltage
MIN
NOM
MAX UNIT
–40
85
°C
±4
±6
V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended Operating Conditions indicate
conditions for which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see
Electrical Characteristics .
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
LMH6703
DBV (SOT-23)
D (SOIC)
UNIT
6 PINS
8 PINS
R_θJA
R_θJC(top)
R_θJB
ψ_JT
ψ_JB
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
182
133
°C/W
139
79
°C/W
40
73
°C/W
28
28
°C/W
40
73
°C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report (SPRA953).
4
Submit Documentation Feedback
Product Folder Links: LMH6703
Copyright © 2005–2016, Texas Instruments Incorporated