LMH6702 Datasheet, PDF (4/25 Pages) National Semiconductor (TI) – Ultra Low Distortion, Wideband Op Amp

LMH6702
SNOSA03H – NOVEMBER 2002 – REVISED MAY 2016
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) ⁽¹⁾⁽²⁾
V_S
I_OUT
Common mode input voltage
Maximum junction temperature
Storage temperature
Soldering information
Infrared or convection (20 s)
Wave soldering (10 s)
MIN
MAX
UNIT
±6.75
V
See ⁽³⁾
V^− to V⁺
V
150
°C
−65
150
°C
235
°C
260
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) The maximum output current (I_OUT) is determined by device power dissipation limitations.
6.2 ESD Ratings
V_(ESD)
Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Machine Model (MM), per JEDEC specification JESD22-C101, all pins⁽²⁾
VALUE
±2000
±200
UNIT
V
(1) Human body model: 1.5 kΩ in series with 100 pF. JEDEC document JEP155 states that 2000-V HBM allows safe manufacturing with a
standard ESD control process. Manufacturing with less than 2000-V HBM is possible with the necessary precautions. Pins listed as
±2000 V may actually have higher performance.
(2) Machine model: 0 Ω in series with 200 pF. JEDEC document JEP157 states that 200-V MM allows safe manufacturing with a standard
ESD control process. Manufacturing with less than 200-V MM is possible with the necessary precautions. Pins listed as ±200 V may
actually have higher performance.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Operating temperature
Nominal supply voltage
MIN
MAX
UNIT
−40
85
°C
±4
±6
V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics tables.
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
LMH6702
DBV (SOT-23)
D (SOIC)
UNIT
5 PINS
8 PINS
R_θJA
R_θJC(top)
R_θJB
ψ_JT
ψ_JB
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
182
133
°C/W
139
79
°C/W
40
73
°C/W
28
28
°C/W
40
73
°C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report (SPRA953).
4
Submit Documentation Feedback
Product Folder Links: LMH6702
Copyright © 2002–2016, Texas Instruments Incorporated