LMH6654 Datasheet, PDF (4/31 Pages) National Semiconductor (TI) – Single/Dual Low Power, 250 MHz, Low Noise Amplifiers

LMH6654, LMH6655
SNOS956E – JUNE 2001 – REVISED AUGUST 2014
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
V_IN Differential
Output Short Circuit Duration
Supply Voltage (V⁺ − V^−)
Voltage at Input pins
Junction Temperature⁽³⁾
Infrared or Convection (20 sec.)
Soldering Information
Wave Soldering (10 sec.)
MIN
See ⁽²⁾
MAX
±1.2
13.2
V⁺ +0.5
V^- -0.5
150
235
260
UNIT
V
V
V
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature
at 150°C.
(3) The maximum power dissipation is a function of T_J(MAX), R_θJA and T_A. The maximum allowable power dissipation at any ambient
temperature is P_D = (T_J(MAX) − T_A)/R_θJA. All numbers apply for packages soldered directly onto a PC board.
6.2 Handling Ratings
T_stg
V_(ESD)
Storage temperature range
Human body model (HBM),
Electrostatic discharge^{(1) per ANSI/ESDA/JEDEC JS-001, all pins(2)}
Machine model (MM)⁽³⁾
MIN
MAX
−65
150
2000
200
(1) Human body model, 1.5 kΩ in series with 100 pF. Machine model: 0Ω in series with 100 pF.
(2) JEDEC document JEP155 states that 2000-V HBM allows safe manufacturing with a standard ESD control process.
(3) JEDEC document JEP157 states that 200-V MM allows safe manufacturing with a standard ESD control process.
UNIT
°C
V
6.3 Recommended Operating Conditions⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
Supply Voltage (V⁺ - V^−)
Operating Temperature Range
MIN
NOM
±2.5
−40
MAX
±6.0
85
UNIT
V
°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics Table.
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
SOIC (D)
8 PINS
VSSOP (DGK) SOT-23 (D)
8 PINS
5 PINS
UNIT
R_θJA
Junction-to-ambient thermal resistance
172
235
265
°C/W
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
4
Submit Documentation Feedback
Copyright © 2001–2014, Texas Instruments Incorporated
Product Folder Links: LMH6654 LMH6655