LMH6624_16 Datasheet, PDF (4/38 Pages) Texas Instruments – LMH6624 and LMH6626 Single/Dual Ultra Low Noise Wideband Operational Amplifier

LMH6624, LMH6626
SNOSA42G – NOVEMBER 2002 – REVISED DECEMBER 2014
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
V_IN Differential
Supply voltage (V⁺ - V^−)
Voltage at Input pins
Input Current
Soldering information
Junction temperature⁽²⁾
Storage temperature
Infrared or convection (20 sec.)
Wave soldering (10 sec.)
MIN MAX UNIT
±1.2
V
13.2
V
V⁺ +0.5,
V^− −0.5
V
±10 mA
235
°C
260
°C
150
°C
-65
150
°C
(1) Absolute maximum ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
(2) Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in
exceeding the maximum allowed junction temperature of 150°C.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Machine model⁽²⁾
VALUE
±2000
±200
UNIT
V
(1) Human body model, 1.5 kΩ in series with 100 pF. JEDEC document JEP155 states that 2000-V HBM allows safe manufacturing with a
standard ESD control process. Manufacturing with less than 2000-V HBM is possible with the necessary precautions. Pins listed as
±2000 V may actually have higher performance.
(2) Machine Model, 0 Ω in series with 200 pF. JEDEC document JEP157 states that 200-V MM allows safe manufacturing with a standard
ESD control process.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Operating temperature⁽²⁾
Operating supply voltage (V+ - V-)
MIN
−40
±2.25
MAX
+125
±6.3
UNIT
°C
V
(1) Absolute maximum ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
(2) Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in
exceeding the maximum allowed junction temperature of 150°C.
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
LMH6624
DBV
D
LMH6626
DGK
D
UNIT
R_θJA
Junction-to-ambient thermal resistance⁽²⁾
5 PINS
265
8 PINS
166
8 PINS
235
8 PINS
166
°C/W
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
(2) The maximum power dissipation is a function of T_J(MAX), R_θJA, and T_A. The maximum allowable power dissipation at any ambient
temperature is P_D = (T_J(MAX) - T_A)/ R_θJA . All numbers apply for packages soldered directly onto a PC board.
4
Submit Documentation Feedback
Copyright © 2002–2014, Texas Instruments Incorporated
Product Folder Links: LMH6624 LMH6626