English
Language : 

LMC6035 Datasheet, PDF (4/29 Pages) National Semiconductor (TI) – Low Power 2.7V Single Supply CMOS Operational Amplifiers
◁
LMC6035, LMC6035-Q1, LMC6036
SNOS875G – JANUARY 2000 – REVISED APRIL 2013
www.ti.com
DC Electrical Characteristics (continued)
Unless otherwise specified, all limits ensured for TJ = 25°C, V+ = 2.7V, V− = 0V, VCM = 1.0V, VO = 1.35V and RL > 1MΩ.
Boldface limits apply at the temperature extremes.
Parameter
VO
Output Swing
Test Conditions
V + = 2.7V
RL = 600Ω to 1.35V
V + = 2.7V
RL = 2kΩ to 1.35V
V + = 15V
RL = 600Ω to 7.5V
V + = 15V,
RL = 2 kΩ to 7.5V
LMC6035I/LMC6036I
Min (1)
Typ (2)
Max (1)
2.0
2.5
1.8
0.2
0.5
0.7
2.4
2.62
2.2
0.07
0.2
0.4
13.5
14.5
13.0
0.36
1.25
1.50
14.2
14.8
13.5
0.12
0.4
0.5
Units
V
V
V
V
IO
Output Current
V O = 0V
Sourcing
4
8
3
mA
V O = 2.7V
Sinking
3
5
2
IS
Supply Current
LMC6035 for Both Amplifiers
V O = 1.35V
LMC6036 for All Four Amplifiers
V O = 1.35V
0.65
1.6
1.9
mA
1.3
2.7
3.0
AC Electrical Characteristics
Unless otherwise specified, all limits ensured for TJ = 25°C, V+ = 2.7V, V− = 0V, VCM = 1.0V, V O = 1.35V and RL > 1 MΩ.
Boldface limits apply at the temperature extremes.
Parameter
Test Conditions
Typ (1)
Units
SR
Slew Rate
See (2)
1.5
V/μs
GBW
Gain Bandwidth Product
V + = 15V
1.4
MHz
θm
Phase Margin
Gm
Gain Margin
Amp-to-Amp Isolation
See (3)
48
°
17
dB
130
dB
en
in
THD
Input-Referred Voltage Noise
Input Referred Current Noise
Total Harmonic Distortion
f = 1kHz
V CM = 1V
f = 1kHz
f = 10kHz, AV = −10
R L = 2kΩ, VO = 8 VPP
V + = 10V
27
nV/√Hz
0.2
fA/√Hz
0.01
%
(1) Typical Values represent the most likely parametric norm or one sigma value.
(2) V+ = 15V. Connected as voltage follower with 10V step input. Number specified is the slower of the positive and negative slew rates.
(3) Input referred, V + = 15V and RL = 100kΩ connected to 7.5V. Each amp excited in turn with 1kHz to produce VO = 12 VPP.
4
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LMC6035 LMC6035-Q1 LMC6036
 ▷