English
Language : 

DS10CP154A_14 Datasheet, PDF (4/20 Pages) Texas Instruments – DS10CP154A 1.5 Gbps 4x4 LVDS Crosspoint Switch
DS10CP154A
SNLS306C – AUGUST 2008 – REVISED APRIL 2013
www.ti.com
Absolute Maximum Ratings(1)(2)
Supply Voltage
LVCMOS Input Voltage
LVCMOS Output Voltage
LVDS Input Voltage
Differential Input Voltage |VID|
LVDS Output Voltage
LVDS Differential Output Voltage
LVDS Output Short Circuit Current Duration
Junction Temperature
Storage Temperature Range
Lead Temperature Range
Soldering (4 sec.)
Maximum Package Power Dissipation at
25°C
RTA0040A Package
Derate RTA0040A Package
Package Thermal Resistance
ESD Susceptibility
θJA
θJC
HBM (3)
MM (4)
CDM (5)
−0.3V to +4V
−0.3V to (VCC + 0.3V)
−0.3V to (VCC + 0.3V)
−0.3V to +4V
1.0V
−0.3V to (VCC + 0.3V)
0V to 1.0V
5 ms
+150°C
−65°C to +150°C
+260°C
4.65W
37.2 mW/°C above +25°C
+26.9°C/W
+3.8°C/W
≥8 kV
≥250V
≥1250V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model, applicable std. JESD22-A114C
(4) Machine Model, applicable std. JESD22-A115-A
(5) Field Induced Charge Device Model, applicable std. JESD22-C101-C
Recommended Operating Conditions
Supply Voltage (VCC)
Receiver Differential Input Voltage (VID)
Operating Free Air Temperature (TA)
SMBus (SDA, SCL)
Min Typ Max Units
3.0
3.3 3.6
V
0
1.0
V
−40 +25 +85
°C
3.6
V
Electrical Characteristics(1)(2)(3)
Over recommended operating supply and temperature ranges unless otherwise specified.
Parameter
Test Conditions
LVCMOS DC SPECIFICATIONS
VIH
High Level Input Voltage
VIL
Low Level Input Voltage
IIH
High Level Input Current
VIN = 3.6V
VCC = 3.6V
EN_smb pin
IIL
Low Level Input Current
VCL
Input Clamp Voltage
VOL
Low Level Output Voltage
VIN = GND, VCC = 3.6V
ICL = −18 mA, VCC = 0V
IOL= 4 mA
SDA pin
Min Typ Max Units
2.0
GND
VDD
V
0.8
V
0
±10
μA
40
175 250
μA
0
±10
μA
−0.9 −1.5
V
0.4
V
(1) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
(2) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except VOD and ΔVOD.
(3) Typical values represent most likely parametric norms for VCC = +3.3V and TA = +25°C, and at the Recommended Operation Conditions
at the time of product characterization and are not ensured.
4
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: DS10CP154A