DRV5023-Q1_16 Datasheet, PDF (4/28 Pages) Texas Instruments – Automotive Digital-Switch Hall Effect Sensor

DRV5023-Q1
SLIS163C – DECEMBER 2014 – REVISED FEBRUARY 2016
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Power supply voltage
Output pin voltage
V_CC
Voltage ramp rate (V_CC), V_CC < 5 V
Voltage ramp rate (V_CC), V_CC > 5 V
Output pin reverse current during reverse supply condition
Magnetic flux density, B_MAX
Operating junction temperature, T_J
Q, see Figure 23
E, see Figure 23
Storage temperature, T_stg
MIN
–22 ⁽²⁾
MAX
40
Unlimited
0
2
–0.5
40
0
100
Unlimited
–40
150
–40
175
–65
150
UNIT
V
V/µs
V
mA
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Ensured by design. Only tested to –20 V.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human-body model (HBM), per AEC Q100-002⁽¹⁾
Charged-device model (CDM), per AEC Q100-011
VALUE
±2500
±500
(1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
V_CC
V_O
I_SINK
T_A
Power supply voltage
Output pin voltage (OUT)
Output pin current sink (OUT)⁽¹⁾
Operating ambient
temperature
Q, see Figure 23
E, see Figure 23
(1) Power dissipation and thermal limits must be observed.
MIN MAX
2.7 38
0 38
0 30
–40 125
–40 150
UNIT
V
V
mA
°C
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
DRV5023-Q1
DBZ (SOT-23)
LPG (TO-92)
UNIT
3 PINS
3 PINS
R_θJA
R_θJC(top)
R_θJB
ψ_JT
ψ_JB
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
333.2
99.9
66.9
4.9
65.2
180
98.6
154.9
40
154.9
°C/W
°C/W
°C/W
°C/W
°C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
4
Submit Documentation Feedback
Copyright © 2014–2016, Texas Instruments Incorporated
Product Folder Links: DRV5023-Q1