DRV5023-Q1_16 Datasheet, PDF (1/28 Pages) Texas Instruments – Automotive Digital-Switch Hall Effect Sensor

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DRV5023-Q1
SLIS163C – DECEMBER 2014 – REVISED FEBRUARY 2016
DRV5023-Q1 Automotive Digital-Switch Hall Effect Sensor
1 Features
•1 Digital Unipolar-Switch Hall Sensor
• AEC-Q100 Qualified for Automotive Applications
– Grade 1: T_A = –40 to 125°C (Q, See
Figure 23)
– Grade 0: T_A = –40 to 150°C (E, See Figure 23)
• Inverse Output Option (FI)
• Superior Temperature Stability
– Sensitivity ±10% Over Temperature
• Multiple Sensitivity Options (B_OP / B_RP):
– 3.5 / 2 mT (FA, FI, see Figure 23)
– 6.9 / 3.2 mT (AJ, see Figure 23)
– 14.5 / 6 mT (BI, see Figure 23)
• Supports a Wide Voltage Range
– 2.7 to 38 V
– No External Regulator Required
• Open Drain Output (30-mA Sink)
• Fast 35-µs Power-On Time
• Small Package and Footprint
– Surface Mount 3-Pin SOT-23 (DBZ)
– 2.92 mm × 2.37 mm
– Through-Hole 3-Pin TO-92 (LPG)
– 4.00 mm × 3.15 mm
• Protection Features
– Reverse Supply Protection (up to –22 V)
– Supports up to 40-V Load Dump
– Output Short-Circuit Protection
– Output Current Limitation
– OUT Short to Battery Protection
Output State
OUT
B_hys
2 Applications
• Docking Detection
• Door Open and Close Detection
• Proximity Sensing
• Valve Positioning
• Pulse Counting
3 Description
The DRV5023-Q1 device is a chopper-stabilized Hall
Effect Sensor that offers a magnetic sensing solution
with superior sensitivity stability over temperature and
integrated protection features.
When the applied magnetic flux density exceeds the
B_OP threshold, the DRV5023-Q1 open-drain output
goes low. The output stays low until the field
decreases to less than B_RP, and then the output goes
to high impedance. The output current sink capability
is 30 mA. A wide operating voltage range from 2.7 to
38 V with reverse polarity protection up to –22 V
makes the device suitable for a wide range of
automotive applications.
Internal protection functions are provided for reverse
supply conditions, load dump, and output short circuit
or over current.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DRV5023-Q1
SOT-23 (3)
TO-92 (3)
2.92 mm × 1.30 mm
4.00 mm × 3.15 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
SOT-23
TO-92
B_RP
B_OF
B_OP
B (mT)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.