AMC1305L25 Datasheet, PDF (31/39 Pages) Texas Instruments – AMC1305x High-Precision, Reinforced Isolated Delta-Sigma Modulators

www.ti.com
AMC1305L25, AMC1305M05, AMC1305M25
SBAS654C – JUNE 2014 – REVISED DECEMBER 2014
Device Support (continued)
13.1.1.1.1 Insulation:
Operational insulation—Insulation needed for the correct operation of the equipment.
Basic insulation—Insulation to provide basic protection against electric shock.
Supplementary insulation—Independent insulation applied in addition to basic insulation in order to ensure
protection against electric shock in the event of a failure of the basic insulation.
Double insulation—Insulation comprising both basic and supplementary insulation.
Reinforced insulation—A single insulation system that provides a degree of protection against electric shock
equivalent to double insulation.
13.1.1.1.2 Pollution Degree:
Pollution Degree 1—No pollution, or only dry, nonconductive pollution occurs. The pollution has no influence on
device performance.
Pollution Degree 2—Normally, only nonconductive pollution occurs. However, a temporary conductivity caused
by condensation is to be expected.
Pollution Degree 3—Conductive pollution, or dry nonconductive pollution that becomes conductive because of
condensation, occurs. Condensation is to be expected.
Pollution Degree 4—Continuous conductivity occurs as a result of conductive dust, rain, or other wet conditions.
13.2 Documentation Support
13.2.1 Related Documentation
• Application Report ISO72x Digital Isolator Magnetic-Field Immunity, SLLA181A
• Application Note Combining ADS1202 with FPGA Digital Filter for Current Measurement in Motor Control
Applications, SBAA094
• LM317-N Data Sheet, SNVS774
• TMS320F2837x Data Sheet, SPRS880
• MSP430F677x Data Sheet, SLAS768
• AMC1210 Data Sheet, SBAS372
13.2.2 Related Links
The table below lists quick access links. Categories include technical documents, support and community
resources, tools and software, and quick access to sample or buy.
PARTS
AMC1305L25
AMC1305M05
AMC1305M25
PRODUCT FOLDER
Click here
Click here
Click here
Table 1. Related Links
SAMPLE & BUY
Click here
Click here
Click here
TECHNICAL
DOCUMENTS
Click here
Click here
Click here
TOOLS &
SOFTWARE
Click here
Click here
Click here
SUPPORT &
COMMUNITY
Click here
Click here
Click here
13.3 Trademarks
All trademarks are the property of their respective owners.
13.4 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Copyright © 2014, Texas Instruments Incorporated
Submit Documentation Feedback
31
Product Folder Links: AMC1305L25 AMC1305M05 AMC1305M25