THS4303_14 Datasheet, PDF (3/30 Pages) Texas Instruments – WIDEBAND FIXED-GAIN AMPLIFIER

THS4303
www.ti.com
RECOMMENDED OPERATING CONDITIONS⁽¹⁾
SLOS421B – NOVEMBER 2003 – REVISED JANUARY 2005
Supply voltage, (VS+ and VS–)
Input common-mode voltage range
Dual supply
Single supply
MIN
±1.5
3
V_S–+1
MAX
±2.5
5
V_S+–1
UNIT
V
V
(1) This data was taken using 2 oz. trace and copper pad that is soldered directly to a 3 in. x 3 in. PCB. For further information, refer to
Application Information section of this data sheet.
PACKAGE
RGT-16 ⁽²⁾
PACKAGE DISSIPATION RATINGS
Θ_JC(°C/W)
2.4
Θ_JA(°C/W)
39.5
POWER RATING⁽¹⁾
T_A≤ 25°C
2.53 W
T_A =85°C
1.01 W
(1) Power rating is determined with a junction temperature of 125°C. This is the point where distortion
starts to substantially increase. Thermal management of the final PCB should strive to keep the
junction temperature at or below 125°C for best performance and long term reliability.
(2) This data was taken using 2 oz. trace and copper pad that is soldered directly to a 3 in. x 3 in. PCB.
For further information, refer to Application Information section of this data sheet.
T_A
–40°C to 85°C
AVAILABLE OPTIONS
PACKAGED DEVICES⁽¹⁾
LEADLESS
GAIN
RGT-16
THS4303RGTR
+10
THS4303RGTT
(1) Packages are available taped and reeled. The R suffix standard quantity is 3000. The T suffix
standard quantity is 250.
INTERNAL FIXED RESISTOR VALUES
DEVICE
THS4303
GAIN (V/V)
+10
R_f
R_g
450
50
3