DS92CK16_14 Datasheet, PDF (3/17 Pages) Texas Instruments – 3V BLVDS 1 to 6 Clock Buffer/Bus Transceiver

DS92CK16
www.ti.com
SNAS044C – NOVEMBER 1999 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
Enable Input Voltage
(DE, OE, CrdCLK_IN)
Voltage (CLK_OUT)
Voltage (CLKI/O±)
Driver Short Circuit Current
Receiver Short Circuit Current
Maximum Package Power Dissipation at +25°C
PW Package
Derate PW Package
θ_JA
θ_JC
Storage Temperature Range
Lead Temperature Range
(Soldering, 4 sec.)
ESD Ratings: HBM ⁽³⁾
CDM ⁽³⁾
Machine Model ⁽³⁾
−0.3V to +4V
−0.3V to +4V
−0.3V to (V_CC + 0.3V)
−0.3V to +4V
momentary
momentary
1500 mW
8.2 mW/°C above +25°C
95°C/W
30°C/W
−65°C to +150°C
260°C
>3000V
>1000V
>200V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be verified. These ratings are not meant to
imply that the devices should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device
operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) ESD Rating: ESD qualification is performed per the following: HBM (1.5 kΩ, 100 pF), Machine Model (250V, 0Ω), IEC 1000-4-2. All VCC
pins connected together, all ground pins connected together.
Recommended Operating Conditions
Supply Voltage (V_CC)
CrdCLK_IN, DE, OE
Input Voltage
Operating Free Air
Temperature (T_A)
Min
+3.0
0
−40
Typ
+3.3
25
Max
+3.6
V_CC
+85
Units
V
V
°C
DC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified ^{(1) (2)}.
Symbol
Parameter
Conditions
Pin
Min
V_TH
V_TL
VCMR
Input Threshold High
Input Threshold Low
Common Mode Voltage
Range ⁽³⁾
VID = 250 mV pk to pk
CLKI/O+,
CLKI/O−
−70
|VID|/2
I_IN
Input Current
V_IN = 0V to V_CC, DE = V_CC, OE =
V_CC, Other Input = 1.2V ± 50 mV
−20
Typ
Max
Units
25
+70
mV
-35
mV
2.4 - |VID|/2 V
±5
+20
µA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except VID, VOD, VTH, and VTL.
(2) All typicals are given for: V_CC = +3.3V and T_A = +25°C.
(3) The VCMR range is reduced for larger VID. Example: If VID=400 mV, then VCMR is 0.2V to 2.2V A VID up to |V_CC–0V| may be applied
between the CLKI/O+ and CLKI/O− inputs, with the Common Mode set to V_CC/2.
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS92CK16