DS90C032_16 Datasheet, PDF (3/18 Pages) Texas Instruments – Quad CMOS Differential Line Receiver

DS90C032
www.ti.com
SNLS094D – JUNE 1998 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
Input Voltage (R_IN+, R_IN−)
Enable Input Voltage (EN, EN*)
Output Voltage (R_OUT)
Maximum Package Power Dissipation at +25°C
D Package
NAJ Package
Derate D Package
Derate NAJ Package
Storage Temperature Range
Lead Temperature Range Soldering (4 seconds)
Maximum Junction Temperature (DS90C032T)
Maximum Junction Temperature (DS90C032E)
ESD Ratings
(HBM, 1.5 kΩ, 100 pF)
(EIAJ, 0 Ω, 200 pF)
−0.3V to +6V
−0.3V to (V_CC +0.3V)
−0.3V to (V_CC +0.3V)
−0.3V to (V_CC +0.3V)
1025 mW
1830 mW
8.2 mW/°C above +25°C
12.2 mW/°C above +25°C
−65°C to +150°C
+260°C
+150°C
+175°C
≥ 3500V
≥ 250V
(1) "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. The table of "Electrical Characteristics" specifies conditions of device operation.
(2) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified.
Recommended Operating Conditions⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
Receiver Input Voltage
Operating Free Air Temperature (T_A)
DS90C032T
DS90C032E
Min
+4.5
GND
−40
−55
Typ
+5.0
+25
+25
Max
+5.5
2.4
+85
+125
Units
V
V
°C
°C
(1) "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. The table of "Electrical Characteristics" specifies conditions of device operation.
(2) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified.
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS90C032
Submit Documentation Feedback
3