English
Language : 

DRV201_15 Datasheet, PDF (3/29 Pages) Texas Instruments – DRV201 Voice Coil Motor Driver for Camera Auto Focus
◁
www.ti.com
5 Pin Configuration and Functions
DRV201
SLVSB25C – AUGUST 2011 – REVISED JUNE 2015
YFM Package
8-Pin PICOSTAR
Bottom View and Top View
SCL
I
SOURCE
VBAT
2
SDA
I
SINK
GND
1
CBA
YFM package has no top side markings
YMB Package
6-Pin DSBGA
Bottom View and Top View
SCL
I
SOURCE
VBAT
2
SDA
I
SINK
GND
1
CBA
201
YMDS
YMB package package markings:
YM = YEAR / MONTH DATE CODE
D = DAY OF LASER MARK
S = ASSEMBLY SITE CODE
0 = Pin A1 (Filled Solid)
PIN
NAME
NO.
VBAT
2A
GND
1A
I_SOURCE
2B
I_SINK
1B
SCL
2C
SDA
1C
Pin Functions
I/O
DESCRIPTION
P Power
P Ground
O Voice coil positive terminal
O Voice coil negative terminal
I
I2C serial interface clock input
I/O I2C serial interface data input/output (open drain)
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
VBAT, ISOURCE, ISINK pin voltage(2)
Voltage at SDA, SCL
Continuous total power dissipation
TJ
Operating junction temperature
TA
Operating ambient temperature
Tstg
Storage temperature
MIN
MAX
–0.3
5.5
–0.3
3.6
Internally limited
–40
125
–40
85
–55
150
UNIT
V
V
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
6.2 ESD Ratings
V(ESD)
Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1)
Charged device model (CDM), per JEDEC specification JESD22-C101, all
pins (2)
VALUE
±4000
±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
Copyright © 2011–2015, Texas Instruments Incorporated
Product Folder Links: DRV201
Submit Documentation Feedback
3
 ▷