OPA376 Datasheet, PDF (23/42 Pages) Burr-Brown (TI) – Precision, Low Noise, Low Quiescent Current, Operational Amplifier

www.ti.com
11 Device and Documentation Support
OPA376, OPA2376, OPA4376
SBOS406G – JUNE 2007 – REVISED DECEMBER 2015
11.1 Device Support
11.1.1 Development Support
11.1.1.1 TINA-TI™ (Free Software Download)
TINA™ is a simple, powerful, and easy-to-use circuit simulation program based on a SPICE engine. TINA-TI™ is
a free, fully-functional version of the TINA software, preloaded with a library of macro models in addition to a
range of both passive and active models. TINA-TI provides all the conventional dc, transient, and frequency
domain analysis of SPICE, as well as additional design capabilities.
Available as a free download from the Analog eLab Design Center, TINA-TI offers extensive post-processing
capability that allows users to format results in a variety of ways. Virtual instruments offer the ability to select
input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic quick-start tool.
NOTE
These files require that either the TINA software (from DesignSoft™) or TINA-TI software
be installed. Download the free TINA-TI software from the TINA-TI folder.
11.1.1.2 TI Precision Designs
TI Precision Designs are analog solutions created by TI’s precision analog applications experts and offer the
theory of operation, component selection, simulation, complete PCB schematic and layout, bill of materials, and
measured performance of many useful circuits. TI Precision Designs are available online at
http://www.ti.com/ww/en/analog/precision-designs/.
11.1.1.3 WEBENCH® Filter Designer
WEBENCH® Filter Designer is a simple, powerful, and easy-to-use active filter design program. The WEBENCH
Filter Designer lets you create optimized filter designs using a selection of TI operational amplifiers and passive
components from TI's vendor partners.
Available as a web-based tool from the WEBENCH® Design Center, WEBENCH® Filter Designer allows you to
design, optimize, and simulate complete multistage active filter solutions within minutes.
11.2 Related Documentation
For related documentation, see the following:
Circuit Board Layout Techniques, SLOA089.
Operational Amplifier Gain stability, Part 3: AC Gain-Error Analysis, SLYT383.
Operational Amplifier Gain Stability, Part 2: DC Gain-Error Analysis, SLYT374.
Using infinite-gain, MFB filter topology in fully differential active filters, SLYT343.
Op Amp Performance Analysis, SBOS054.
Single-Supply Operation of Operational Amplifiers, SBOA059.
Tuning in Amplifiers, SBOA067.
Shelf-Life Evaluation of Lead-Free Component Finishes, SZZA046.
Copyright © 2007–2015, Texas Instruments Incorporated
Submit Documentation Feedback
23
Product Folder Links: OPA376 OPA2376 OPA4376