CC2650 Datasheet, PDF (22/64 Pages) Texas Instruments – Multistandard Wireless MCU

CC2650
SWRS158B – FEBRUARY 2015 – REVISED JULY 2016
ADC Characteristics (continued)
T_c = 25°C, V_DDS = 3.0 V and voltage scaling enabled, unless otherwise noted.⁽¹⁾
PARAMETER
TEST CONDITIONS
Conversion time
Serial conversion, time-to-output, 24-MHz clock
Current consumption
Current consumption
Reference voltage
Reference voltage
Reference voltage
Reference voltage
Input Impedance
Internal 4.3-V equivalent reference⁽²⁾
VDDS as reference
Equivalent fixed internal reference (input voltage scaling
enabled). For best accuracy, the ADC conversion should
be initiated through the TIRTOS API in order to include the
gain/offset compensation factors stored in FCFG1.
Fixed internal reference (input voltage scaling disabled).
For best accuracy, the ADC conversion should be initiated
through the TIRTOS API in order to include the gain/offset
compensation factors stored in FCFG1. This value is
derived from the scaled value (4.3V) as follows:
Vref=4.3V*1408/4095
VDDS as reference (Also known as RELATIVE) (input
voltage scaling enabled)
VDDS as reference (Also known as RELATIVE) (input
voltage scaling disabled)
200 ksps, voltage scaling enabled. Capacitive input, Input
impedance depends on sampling frequency and sampling
time
(5) Applied voltage must be within absolute maximum ratings (Section 5.1) at all times.
MIN
TYP
50
0.66
0.75
4.3 ^{(2) (5)}
1.48
VDDS
VDDS /
2.82 ⁽⁵⁾
>1
www.ti.com
MAX
UNIT
clock-
cycles
mA
mA
V
V
V
V
MΩ
22
Specifications
Submit Documentation Feedback
Product Folder Links: CC2650
Copyright © 2015–2016, Texas Instruments Incorporated