AM1705DPTPA3 Datasheet, PDF (21/164 Pages) Texas Instruments – AM1705 ARM Microprocessor

AM1705
www.ti.com
SPRS657D – FEBRUARY 2010 – REVISED MARCH 2013
2.6.8 Enhanced Quadrature Encoder Pulse Module (eQEP)
Table 2-10. Enhanced Quadrature Encoder Pulse Module (eQEP) Terminal Functions
SIGNAL NAME
PIN NO
PTP
TYPE⁽¹⁾ PULL⁽²⁾
MUXED
DESCRIPTION
eQEP0
SPI0_ENA/UART0_CTS/EQEP0A/GP5[3]/BOOT[3]
12
SPI0_SCS[0]/UART0_RTS/EQEP0B/GP5[4]/BOOT[4]
9
I
IPU
SPIO, UART0,
eQEP0A quadrature
input
I
GPIO, BOOT
IPU
eQEP0B quadrature
input
SPI0_SOMI[0]/EQEP0I/GP5[0]/BOOT[0]
SPI0_SIMO[0]/EQEP0S/GP5[1]/BOOT[1]
17
I
IPD
eQEP0 index
SPI0, GPIO, BOOT
18
I
IPD
eQEP0 strobe
eQEP1
AXR1[3]/EQEP1A/GP4[3]
AXR1[4]/EQEP1B/GP4[4]
174
I
IPD
eQEP1A quadrature
input
McASP1, GPIO
173
I
IPD
eQEP1B quadrature
input
SPI0_CLK/EQEP1I/GP5[2]/BOOT[2]
11
I
IPD SPI0, GPIO, BOOT eQEP1 index
SPI1_CLK/EQEP1S/GP5[7]/BOOT[7]
16
I
IPD SPI1, GPIO, BOOT eQEP1 strobe
(1) I = Input, O = Output, I/O = Bidirectional, Z = High impedance, PWR = Supply voltage, GND = Ground, A = Analog signal.
Note: The pin type shown refers to the input, output or high-impedance state of the pin function when configured as the the signal name
highlighted in bold. All multiplexed signals may enter a high-impedance state when the configured function is input-only or the configured
function supports high-Z operation. All GPIO signals can be used as input or output. For multiplexed pins where functions have different
types (i.e., input versus output), the table reflects the pin function direction for that particular peripheral.
(2) IPD = Internal Pulldown resistor, IPU = Internal Pullup resistor
Copyright © 2010–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: AM1705
Device Overview
21