AMC1204_14 Datasheet, PDF (20/37 Pages) Texas Instruments – 20MHz, Second-Order, Isolated Delta-Sigma Modulator for Current-Shunt Measurement

AMC1204
AMC1204B
SBAS512D – APRIL 2011 – REVISED DECEMBER 2013
www.ti.com
An example code for an implementation of a sinc³ filter in an FPGA follows. For more information, see the
application note Combining ADS1202 with FPGA Digital Filter for Current Measurement in Motor Control
Applications (SBAA094) , available for download at www.ti.com.
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity FLT is
port(RESN, MOUT, MCLK, CNR : in std_logic;
CN5 : out std_logic_vector(23 downto 0));
end FLT;
architecture RTL of FLT is
signal DN0, DN1, DN3, DN5 : std_logic_vector(23 downto 0);
signal CN1, CN2, CN3, CN4 : std_logic_vector(23 downto 0);
signal DELTA1 : std_logic_vector(23 downto 0);
begin
process(MCLK, RESn)
begin
if RESn = '0' then
DELTA1 <= (others => '0');
elsif MCLK'event and MCLK = '1' then
if MOUT = '1' then
DELTA1 <= DELTA1 + 1;
end if;
end if;
end process;
process(RESN, MCLK)
begin
if RESN = '0' then
CN1 <= (others => '0');
CN2 <= (others => '0');
elsif MCLK'event and MCLK = '1' then
CN1 <= CN1 + DELTA1;
CN2 <= CN2 + CN1;
end if;
end process;
process(RESN, CNR)
begin
if RESN = '0' then
DN0 <= (others => '0');
DN1 <= (others => '0');
DN3 <= (others => '0');
DN5 <= (others => '0');
elsif CNR'event and CNR = '1' then
DN0 <= CN2;
DN1 <= DN0;
DN3 <= CN3;
DN5 <= CN4;
end if;
end process;
CN3 <= DN0 - DN1;
CN4 <= CN3 - DN3;
CN5 <= CN4 - DN5;
end RTL;
20
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links: AMC1204 AMC1204B