English
Language : 

VSP5010 Datasheet, PDF (2/25 Pages) Texas Instruments – 12-Bit, 31-MSPS, Dual-Channel CCD ANALOG FRONT-END FOR DIGITAL COPIERS
◁
VSP5010
SBES014 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION(1)
PRODUCT
VSP5010PM
PACKAGE- PACKAGE
LEAD
DESIGNATOR
LQFP-64
PM
SPECIFIED
TEMPERATURE
RANGE
–25°C to +85°C
PACKAGE
MARKING
VSP5010PM
ORDERING
NUMBER
VSP5010PM
VSP5010PMR
TRANSPORT
MEDIA, QUANTITY
Tray, 160 Pieces
Tape and Reel, 1000
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS(1)
Over operating free-air temperature range (unless otherwise noted).
Supply voltage
Supply voltage differences
Ground voltage differences
Digital input voltage
Analog input voltage
Input current (all pins except supplies)
Ambient temperature under bias
Storage temperature
Junction temperature
Lead temperature (soldering, 5s)
Package temperature (IR reflow, peak, 10s)
VCC, VDD
VCC, VDD
AGND, DGND
VSP5010
+4.0
±0.1
±0.1
–0.3 to (VDD + 0.3)
–0.3 to (VCC + 0.3)
±10
–40 to +125
–55 to +150
+150
+260
+235
UNIT
V
V
V
V
V
mA
°C
°C
°C
°C
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability. These are stress ratings only and functional
operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied.
RECOMMENDED OPERATING CONDITIONS
Over operating free-air temperature range, unless otherwise noted.
Analog supply voltage
Digital supply voltage
Analog input voltage, full-scale (0 dB)
Digital input logic family
Digital input clock frequency
Digital output load capacitance
Operating free-air temperature, TA
MIN
VCC
3
VDD
3
System clock
10
–25
NOM
3.3
3.3
1
CMOS
30
MAX
3.6
3.6
30
+85
UNIT
V
V
MHz
pF
°C
2
Submit Documentation Feedback
Product Folder Link(s): VSP5010
Copyright © 2008, Texas Instruments Incorporated
 ▷