LMH6515 Datasheet, PDF (2/31 Pages) National Semiconductor (TI) – 600 MHz, Digital Controlled, Variable Gain Amplifier

LMH6515
SNOSAX4C – AUGUST 2007 – REVISED MARCH 2013
Typical Application
RF
V_CC
LMH6515
www.ti.com
ADC
LO
5
GAIN 1-5
LATCH
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾⁽²⁾
ESD Tolerance⁽³⁾
Human Body Model
Machine Model
Positive Supply Voltage (Pin 3)
Output Voltage (pin 14,15)
Differential Voltage Between Any Two Grounds
Analog Input Voltage Range
Digital Input Voltage Range
Output Short Circuit Duration (one pin to ground)
Junction Temperature
Storage Temperature Range
Soldering Information
Infrared or Convection (20 sec)
Wave Soldering (10 sec)
2 kV
150V
−0.6V to 5.5V
−0.6V to 6.8V
<200 mV
−0.6V to V_CC
−0.6V to 3.6V
Infinite
+150°C
−65°C to +150°C
235°C
260°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics tables.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of
JEDEC)Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).
OPERATING RATINGS⁽¹⁾
Supply Voltage (Pin 3)
4V to 5.25V
Output Voltage Range (Pin 14, 15)
1.4V to 6.4V
Differential Voltage Between Any Two Grounds
<10 mV
Analog Input Voltage Range, AC Coupled
Temperature Range⁽²⁾
±1.4V
−40°C to +85°C
Package Thermal Resistance (θ_JA) 16-Pin WQFN
47°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics tables.
(2) The maximum power dissipation is a function of T_J(MAX), θ_JA. The maximum allowable power dissipation at any ambient temperature is
P_D = (T_J(MAX) – T_A)/ θ_JA. All numbers apply for packages soldered directly onto a PC Board.
2
Submit Documentation Feedback
Product Folder Links: LMH6515
Copyright © 2007–2013, Texas Instruments Incorporated