LMC568 Datasheet, PDF (2/12 Pages) National Semiconductor (TI) – Low Power Phase-Locked Loop

LMC568
SNAS559B – MAY 1999 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Input Voltage, Pin 3
Supply Voltage, Pin 4
Output Voltage, Pin 8
Voltage at All Other Pins
Output Current, Pin 8
Package Dissipation
Operating Temperature Range (T_A)
Storage Temperature Range
Soldering Information
PDIP Package
SOIC Package
Soldering (10 seconds)
Vapor Phase (60 seconds)
Infrared (15 seconds)
2 V_p–p
10V
13V
V_s to Gnd
30 mA
500 mW
−25°C to +125°C
−55°C to +150°C
260°C
215°C
220°C
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
Electrical Characteristics
Test Circuit, T_A= 25°C, V_S= 5V, RtCt #2, Sw. 1 Pos. 0; and no input unless otherwise noted.
Symbol
Parameter
Conditions
Min
Typ
Max Units
I4
Power Supply Current
RtCt # 1, Quiescent or Activated
V3
Input D.C. Bias
V_S = 2V
V_S = 5V
V_S = 9V
0.35
0.75
1.5 mAdc
1.2
2.4
0
mVdc
R3
Input Resistance
40
kΩ
I8
Output Leakage
1
100 nAdc
f₀
Center Frequency F_osc ÷ 2 RtCt #2, Measure Oscillator Frequency and V_S = 2V
Divide by 2
V_S = 5V
V_S = 9V
Δf₀
Center Frequency Shift
with Supply
98
90
103
115
kHz
105
1.0
2.0
%/V
V_in
Input Threshold
ΔV_in
Input Hysteresis
V8
Output "Sat" Voltage
L.D.B.W. Largest Detection
Bandwidth
ΔBW
Bandwidth Skew
Set Input Frequency Equal to f₀ Measured ^{VS = 2V}
8
Above, Increase Input Level until Pin 8 Goes V_S = 5V
15
Low.
V_S = 9V
Starting at Input Threshold, Decrease Input Level until Pin
8 Goes High
Input Level > Threshold Choose RL for
Specified I8
I8 = 2 mA
I8 = 20 mA
Measure F_osc with Sw. 1 in Pos. 0, 1, and 2; V_S = 2V
V_S = 5V
40
V_S = 9V
16
25
26
42 mVrms
45
1.5
mVrms
0.06
0.15
Vdc
0.7
30
55
%
60
1
±5
%
V_out
Recovered Audio
Typical Application Circuit
Input = 100 mVrms, F = 100 kHz
F_mod = 400 Hz, ± 10 kHz Dev.
V_S = 2V
V_S = 5V
V_S = 9V
170
270
mVrms
400
2
Submit Documentation Feedback
Product Folder Links: LMC568
Copyright © 1999–2013, Texas Instruments Incorporated