DS90LV032AQML Datasheet, PDF (2/14 Pages) Texas Instruments – DS90LV032AQML 3V LVDS Quad CMOS Differential Line Receiver

DS90LV032AQML
November 15, 2011
3V LVDS Quad CMOS Differential Line Receiver
General Description
The DS90LV032A is a quad CMOS differential line receiver
designed for applications requiring ultra low power dissipation
and high data rates.
The DS90LV032A accepts low voltage (350 mV typical) dif-
ferential input signals and translates them to 3V CMOS output
levels. The receiver supports a TRI-STATE^® function that
may be used to multiplex outputs.
The DS90LV032A and companion LVDS line driver (eg.
DS90LV031A) provide a new alternative to high power PECL/
ECL devices for high speed point-to-point interface applica-
tions.
In addition, the DS90LV032A provides power-off high
impedance LVDS inputs. This feature assures minimal load-
ing effect on the LVDS bus lines when V_CC is not present.
Features
■ ^{Low chip to chip skew}
■ ^{Low differential skew}
■ ^{High impedance LVDS inputs with power-off}
■ ^{Low power dissipation}
■ ^{Accepts small swing (330 mV) differential signal levels.}
■ ^{Compatible with ANSI/TIA/EIA-644}
■ ^{Operating temperature range (-55°C to +85°C)}
■ ^{Pin compatible with DS90C032A and DS26C32A.}
■ ^{Typical Rise/Fall time is 350pS.}
Ordering Information
NS Part Number
DS90LV032AW-QML
DS90LV032AWGQML
DS90LV032AW-MLS
DS90LV032AWGMLS
DS90LV032 MDS
SMD Part Number
5962–9865201QFA
5962–9865201QXA
Connection Diagram
Dual-in-Line Pictured
NS Package Number
W16A
WG16A
W16A
WG16A
(Note 10)
Package Description
16LD Ceramic Flatpack
16LD Ceramic SOIC
16LD Ceramic Flatpack
16LD Ceramic SOIC
BARE DIE
Functional Diagram
20163901
See NS Package Number W16A or WG16A
TRI-STATE^® is a registered trademark of National Semiconductor Corporation.
© 2011 Texas Instruments Incorporated 201639
20163902
www.ti.com