DS90C402_13 Datasheet, PDF (2/14 Pages) Texas Instruments – Dual Low Voltage Differential Signaling (LVDS) Receiver

DS90C402
SNLS001C – JUNE 1998 – REVISED APRIL 2013
www.ti.com
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
Input Voltage (R_IN+, R_IN−)
Output Voltage (R_OUT)
Maximum Package Power Dissipation @ +25°C
Storage Temperature Range
Lead Temperature Range
Soldering (4 sec.)
Maximum Junction Temperature
ESD Rating⁽³⁾
D Package
Derate D Package
(HBM, 1.5 kΩ, 100 pF)
(EIAJ, 0 Ω, 200 pF)
−0.3V to +6V
−0.3V to (V_CC + 0.3V)
−0.3V to (V_CC + 0.3V)
1025 mW
8.2 mW/°C above +25°C
−65°C to +150°C
+260°C
+150°C
≥ 3,500V
≥ 250V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) ESD Rating: HBM (1.5 kΩ, 100 pF) ≥ 3,500V EIAJ (0Ω, 200 pF) ≥ 250V
Recommended Operating Conditions
Supply Voltage (V_CC)
Receiver Input Voltage
Operating Free Air Temperature (T_A)
Min
Typ
Max
+4.5
+5.0
+5.5
GND
2.4
−40
+25
+85
Units
V
V
°C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.⁽¹⁾⁽²⁾
Symbol
Parameter
Conditions
Pin Min Typ Max Units
V_TH
Differential Input High Threshold
V_CM = + 1.2V
V_TL
Differential Input Low Threshold
I_IN
Input Current
V_IN = +2.4V
V_CC = 5.5V
V_IN = 0V
V_OH
Output High Voltage
I_OH = −0.4 mA, V_ID = +200 mV
I_OH = −0.4mA, Inputs terminated
I_OH = −0.4mA, Inputs Open
I_OH = −0.4mA, Inputs Shorted
V_OL
Output Low Voltage
I_OS
Output Short Circuit Current
I_OL = 2 mA, V_ID = −200 mV
V_OUT = 0V ⁽³⁾
I_CC
No Load Supply Current
Inputs Open
R_IN+,
R_IN−
−100
+100 mV
mV
−10 ±1 +10 μA
−10 ± 1 +10 µA
R_OUT 3.8
4.9
V
3.8 4.9
V
3.8 4.9
V
4.9
V
0.07 0.3
V
−15 −60 −100 mA
V_CC
3.5
10
mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified.
(2) All typicals are given for: V_CC = +5.0V, T_A = +25°C.
(3) Output short circuit current (I_OS) is specified as magnitude only, minus sign indicates direction only. Only one output should be shorted
at a time, do not exceed maximum junction temperature specification.
2
Submit Documentation Feedback
Product Folder Links: DS90C402
Copyright © 1998–2013, Texas Instruments Incorporated