DS80EP100_14 Datasheet, PDF (2/21 Pages) Texas Instruments – 5 to 12.5 Gbps, Power-Saver Equalizer for Backplanes and Cables

DS80EP100
SNLS279B – JULY 2007 – REVISED MAY 2008
Pin Name
Pin Number
High speed differential I/O
IOB-
4
IOB+
6
NC
Exposed
Pad
2, 5
DAP
Connection Diagram
Pin Descriptions (continued)
I/O Type
Description
I/O
Symmetric differential I/O
N/A
Reserved.
Do not connect.
IOA+ NC IOA-
123
www.ti.com
DAP - NC
654
IOB+ NC IOB-
Figure 1. Bottom View
2.2mm x 2.5mm 6-Pin LLP Package
Package Number SDA14A
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾
INPUT/OUTPUT
(IOA+ and IOB+) or (IOA- and IOB-)
(IOA+ and IOA-) or (IOB+ and IOB-)
(IOA+ and IOB-) or (IOA- and IOB+)
Junction Temperature
Storage Temperature
Lead Temperature
Soldering, 4 sec
ESD Rating
HBM, 1.5 kΩ, 100 pF
+2V
+4V
+4V
+150°C
−65°C to +150°C
+260°C
1.3kV
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions.
Recommended Operating Conditions
Ambient Temperature
Bit Rate
Min
Typ
Max
−40
25
+85
5
12.5
Units
°C
Gbps
Electrical Characteristics ⁽¹⁾
Over recommended operating conditions unless other specified. All parameters are guaranteed by test, statistical analysis or
design.
(1) The Electrical Characteristics tables list guaranteed specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not guaranteed.
2
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Links: DS80EP100