DAC904 Datasheet, PDF (2/23 Pages) Burr-Brown (TI) – 14-Bit, 165MSPS DIGITAL-TO-ANALOG CONVERTER

ABSOLUTE MAXIMUM RATINGS
+V_A to AGND ......................................................................... –0.3V to +6V
+V_D to DGND ........................................................................ –0.3V to +6V
AGND to DGND ................................................................. –0.3V to +0.3V
+V_A to +V_D ............................................................................... –6V to +6V
CLK, PD to DGND ....................................................... –0.3V to V_D + 0.3V
D0-D13 to DGND ......................................................... –0.3V to V_D + 0.3V
I_OUT, I_OUT to AGND .......................................................... –1V to V_A + 0.3V
BW, BYP to AGND ....................................................... –0.3V to V_A + 0.3V
REF_IN, FSA to AGND ................................................... –0.3V to V_A + 0.3V
INT/EXT to AGND ........................................................ –0.3V to V_A + 0.3V
Junction Temperature .................................................................... +150°C
Case Temperature ......................................................................... +100°C
Storage Temperature ..................................................................... +125°C
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
PACKAGE/ORDERING INFORMATION
PRODUCT
DAC904U
"
DAC904E
"
PACKAGE-LEAD
SO-28
"
TSSOP-28
"
PACKAGE
DESIGNATOR⁽¹⁾
DW
"
PW
"
SPECIFIED
TEMPERATURE
RANGE
–40°C to +85°C
"
–40°C to +85°C
"
PACKAGE
MARKING
DAC904U
"
DAC904E
"
NOTE: (1) For the most current specifications and package information, refer to our web site at www.ti.com.
ORDERING
NUMBER
DAC904U
DAC904U/1K
DAC904E
DAC904E/2K5
TRANSPORT
MEDIA, QUANTITY
Rails, 28
Tape and Reel, 1000
Rails, 52
Tape and Reel, 2500
DEMO BOARD ORDERING INFORMATION
PRODUCT
DAC904U
DAC904E
DEMO BOARD
ORDERING NUMBER
DEM-DAC90xU
DEM-DAC904E
COMMENT
Populated evaluation board without DAC. Order sample of desired DAC90x model separately.
Populated evaluation board including the DAC904E.
ELECTRICAL CHARACTERISTICS
At T_A = full specified temperature range, +V_A = +5V, +V_D = +5V, differential transformer coupled output, 50Ω doubly terminated, unless otherwise specified.
DAC904U, E
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
RESOLUTION
OUTPUT UPDATE RATE
Output Update Rate (f_CLOCK)
Full Specified Temperature Range, Operating
STATIC ACCURACY⁽¹⁾
Differential Nonlinearity (DNL)
Integral Nonlinearity (INL)
DYNAMIC PERFORMANCE
Spurious-Free Dynamic Range (SFDR)
f_OUT = 1.0MHz, f_CLOCK = 25MSPS
f_OUT = 2.1MHz, f_CLOCK = 50MSPS
f_OUT = 5.04MHz, f_CLOCK = 50MSPS
f_OUT = 5.04MHz, f_CLOCK = 100MSPS
f_OUT = 20.2MHz, f_CLOCK = 100MSPS
f_OUT = 25.3MHz, f_CLOCK = 125MSPS
f_OUT = 41.5MHz, f_CLOCK = 125MSPS
f_OUT = 27.4MHz, f_CLOCK = 165MSPS
f_OUT = 54.8MHz, f_CLOCK = 165MSPS
Spurious-Free Dynamic Range within a Window
f_OUT = 5.04MHz, f_CLOCK = 50MSPS
f_OUT = 5.04MHz, f_CLOCK = 100MSPS
Total Harmonic Distortion (THD)
f_OUT = 2.1MHz, f_CLOCK = 50MSPS
f_OUT = 2.1MHz, f_CLOCK = 125MSPS
Two Tone
f_OUT1 = 13.5MHz, f_OUT2 = 14.5MHz, f_CLOCK = 100MSPS
2.7V to 3.3V
4.5V to 5.5V
Ambient, T_A
T_A = +25°C
f_CLOCK = 25MSPS, f_OUT = 1.0MHz
T_A = +25°C
To Nyquist
2MHz Span
4MHz Span
14
Bits
125
165
MSPS
165
200
MSPS
–40
+85
°C
±2.5
LSB
±3.0
LSB
72
79
dBc
76
dBc
68
dBc
68
dBc
64
dBc
60
dBc
55
dBc
60
dBc
55
dBc
82
dBc
82
dBc
–75
dBc
–74
dBc
63
dBc
2
DAC904
www.ti.com
SBAS095C