BQ27510-G2 Datasheet, PDF (2/38 Pages) Texas Instruments – System-Side Impedance Track™ Fuel Gauge With Direct Battery Connection

bq27510-G2
SLUS948 – AUGUST 2010
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
DEVICE INFORMATION
AVAILABLE OPTIONS
PART NUMBER⁽¹⁾
bq27510DRZR-G2
bq27510DRZT-G2
PACKAGE ⁽²⁾
12-pin, 2,5-mm × 4-mm
SON
TA
–40°C to 85°C
COMMUNICATION
FORMAT
I²C
TAPE and REEL
QUANTITY
3000
250
(1) For bq27510-G1 users, please refer to "bq27510-G1 to bq27510-G2 CHANGE LIST" (SLUA567) for device change information.
(2) For the most current package and ordering information see the Package Option Addendum at the end of this document; or, see the TI
website at www.ti.com.
PIN DIAGRAM
BI/TOUT ¹
REG25 2
REGIN ³
BAT ⁴
Vcc ⁵
Vss ⁶
12 _{BAT_LOW/BAT_GD}
11 SCL
10 SDA
bq27510-G2
9 _TS
8 SRN
7 SRP
PIN
NAME
NO.
BI/TOUT
1
REG25
2
REGIN
3
BAT
4
Vcc
5
Vss
6
SRP
7
SRN
8
TS
9
SDA
10
SCL
11
BAT_LOW/ 12
BAT_GD
TYPE ⁽¹⁾
PIN FUNCTIONS
DESCRIPTION
I/O
Battery-insertion detection input. Power pin for pack thermistor network. Thermistor-multiplexer control
pin. Open-drain I/O. Use with pull-up resistor >1MΩ (1.8 MΩ typical).
P
2.5 V output voltage of the internal integrated LDO.
P
The input voltage for the internal integrated LDO.
I
Cell voltage measurement input. ADC input.
P
Processor power input. Decouple with 0.1mF ceramic capacitor minimum.
P
Device ground
IA
Analog input pin connected to the internal coulomb counter where SRP is nearest the
PACK-connection. Connect to 5-mΩ to 20-mΩ sense resistor.
IA
Analog input pin connected to the internal coulomb counter where SRN is nearest the V_SS-connection.
Connect to a 5-mΩ to 20-mΩ sense resistor.
IA
Pack thermistor voltage sense (use 103AT-type thermistor). ADC input
I/O
Slave I²C serial communications data line for communication with system (Master). Open-drain I/O.
Use with 10-kΩ pull-up resistor (typical).
I
Slave I²C serial communications clock input line for communication with system (Master). Use with
10-kΩ pull-up resistor (typical).
O
Battery-good or Battery-low output indicator. Desired function polarity selected through the Operation
Configuration register. Open-drain output
(1) I/O = Digital input/output; IA = Analog input; P = Power connection.
2
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated