LMH6552 Datasheet, PDF (16/38 Pages) Texas Instruments – 1.5-GHz Fully Differential Amplifier

LMH6552
SNOSAX9I – APRIL 2007 – REVISED JANUARY 2015
www.ti.com
8.4 Device Functional Modes
This wideband FDA requires external resistors for correct signal-path operation. When configured for the desired
input impedance and gain setting with these external resistors, the amplifier can be either on with the PD pin
asserted to a voltage greater than Vs– + 3.0 V, or turned off by asserting PD low. Disabling the amplifier shuts
off the quiescent current and stops correct amplifier operation. The signal path is still present for the source
signal through the external resistors. The Vocm control pin sets the output average voltage. Left open, Vocm will
float to an indeterminate voltage. Driving this high-impedance input with a voltage reference within its valid range
sets a target for the internal Vcm error amplifier.
16
Submit Documentation Feedback
Product Folder Links: LMH6552
Copyright © 2007–2015, Texas Instruments Incorporated