HD3SS214_16 Datasheet, PDF (15/25 Pages) Texas Instruments – 8.1 Gbps DisplayPort 1.3 2:1/1:2 Differential Switch

www.ti.com
HD3SS214
SLAS907A – DECEMBER 2015 – REVISED JULY 2016
8.2.4.2.2 CONFIG1 and CONFIG2 Routing
The HD3SS214 only routes the high speed main link, AUX, and Hot Plug Detect (HPD) lines, which means
CONFIG1 and CONFIG2 lines need to be routed externally. This is necessary because these lines are important
for DP++ as CONFIG1 carries the CAD signal.
A Texas Instruments TS3USB221 (SCDS263) is used to route these signals. It is a 2:1/1:2 USB switch that
operates similarly to the HD3SS214. Each port has two inputs, so it is ideal for the CONFIG signals. SRC_SEL is
used to select which source the CONFIG signals are from. The circuit for routing these signals can be seen in
Figure 8.
Figure 8. CONFIG Signal Routing
Copyright © 2015–2016, Texas Instruments Incorporated
Product Folder Links: HD3SS214
Submit Documentation Feedback
15