English
Language : 

TM4C123GH6ZRB Datasheet, PDF (1383/1471 Pages) Texas Instruments – Tiva Microcontroller
Tiva™ TM4C123GH6ZRB Microcontroller
Table 23-2. Signals by Pin Number (continued)
Pin Number
Pin Name
Pin Type Buffer Typea Description
PF0
I/O
TTL
GPIO port F bit 0.
C0o
O
TTL
Analog comparator 0 output.
CAN0Rx
I
TTL
CAN module 0 receive.
M1PWM4
O
TTL
Motion Control Module 1 PWM 4. This signal is controlled by
Module 1 PWM Generator 2.
M9
NMI
PhA0
I
TTL
Non-maskable interrupt.
I
TTL
QEI module 0 phase A.
SSI1Rx
I
TTL
SSI module 1 receive.
T0CCP0
I/O
TTL
16/32-Bit Timer 0 Capture/Compare/PWM 0.
TRD2
O
TTL
Trace data 2.
U1RTS
O
TTL
UART module 1 Request to Send modem flow control output line.
XOSC0
M10
I
Analog Hibernation module oscillator crystal input or an external clock
reference input. Note that this is either a 32.768-kHz crystal or a
32.768-kHz oscillator for the Hibernation module RTC.
PN7
I/O
TTL
GPIO port N bit 7.
M11
M1PWM7
O
TTL
Motion Control Module 1 PWM 7. This signal is controlled by
Module 1 PWM Generator 3.
WT4CCP1
I/O
TTL
32/64-Bit Wide Timer 4 Capture/Compare/PWM 1.
M12
HIB
O
TTL
An output that indicates the processor is in Hibernate mode.
PP0
I/O
TTL
GPIO port P bit 0.
M13
M0PWM0
O
TTL
Motion Control Module 0 PWM 0. This signal is controlled by
Module 0 PWM Generator 0.
T4CCP0
I/O
TTL
16/32-Bit Timer 4 Capture/Compare/PWM 0.
PA5
I/O
TTL
GPIO port A bit 5.
N1
SSI0Tx
O
TTL
SSI module 0 transmit
PA7
I/O
TTL
GPIO port A bit 7.
N2
I2C1SDA
I/O
OD
I2C module 1 data.
M1PWM3
O
TTL
Motion Control Module 1 PWM 3. This signal is controlled by
Module 1 PWM Generator 1.
PG7
I2C5SDA
I/O
TTL
GPIO port G bit 7.
I/O
OD
I2C module 5 data.
N3
IDX1
M0PWM7
I
TTL
QEI module 1 index.
O
TTL
Motion Control Module 0 PWM 7. This signal is controlled by
Module 0 PWM Generator 3.
WT1CCP1
I/O
TTL
32/64-Bit Wide Timer 1 Capture/Compare/PWM 1.
PG6
I/O
TTL
GPIO port G bit 6.
I2C5SCL
I/O
OD
I2C module 5 clock. Note that this signal has an active pull-up. The
N4
M0PWM6
corresponding port pin should not be configured as open drain.
O
TTL
Motion Control Module 0 PWM 6. This signal is controlled by
Module 0 PWM Generator 3.
WT1CCP0
I/O
TTL
32/64-Bit Wide Timer 1 Capture/Compare/PWM 0.
June 12, 2014
Texas Instruments-Production Data
1383