DS16EV5110A Datasheet, PDF (13/22 Pages) Texas Instruments – DS16EV5110A Video Equalizer (3D+C) for DVI, HDMI Source/Repeater/Sink Applications

Application Information
The DS16EV5110A is used to recondition DVI/HDMI video
signals or differential signals with similar characteristics for
signal loss and degradation due to transmission through a
length of shielded or unshielded cable. The DS16EV5110A
maybe used on the Source or Sink side of the application or
as a Repeater (Sink and Source).
In the Source Side application the DS16EV5110A is located
near the Serializer and conditions the signal for losses due to
internal cabling or FR4 losses (backplane). The signal is then
re-driven at full amplitude and reduced jitter over the external
cable interconnect.
FIGURE 5. DS16EV5110A Source-Side Application
In the Sink Side application the DS16EV5110A is located next
to the Deserializer and post-conditions the signal for losses
incurred over the cable interconnect.
30064654
FIGURE 6. DS16EV5110A Sink-Side Application
30064639
The DS16EV5110A may be used in repeater type application
as shown in Figure 7 . The cable on the output of the repeater
tends to be shorter and may be a dongle type application. The
input of the repeater recovers the signal after transmission
over a long cable interconnect.
www.national.com
30064624
FIGURE 7. DS16EV5110A Repeater Application with CAT 5 Cable
12