5962R9951705VXA Datasheet, PDF (13/36 Pages) Texas Instruments – LM117QML 3-Terminal Adjustable Regulator

LM117QML, LM117QML-SP
www.ti.com
SNVS356D – MARCH 2006 – REVISED APRIL 2013
LM117K RH Electrical Characteristics
AC Parameters⁽¹⁾
Symbol
Parameter
Conditions
Notes Min Max Unit
Sub-
groups
V_NO
ΔV_O / ΔV_I
ΔV_O / ΔI_L
ΔV_I / ΔV_O
Output Noise Voltage
Line Transient Response
Load Transient Response
Ripple Rejection
V_I = 6.25V, I_L = -100mA
V_I = 6.25V, ΔV_I = 3V,
I_L = -10mA
V_I = 6.25V, ΔI_L = -400mA,
I_L = -100mA
V_I = 6.25V, I_L = -500mA,
E_I = 1V_RMS at ƒ = 2400Hz
See ⁽²⁾
See ⁽³⁾
120 µV_RMS
7
18
mV
7
120
mV
7
65
dB
4
(1) Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the "Post
Radiation Limits" table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect.
Radiation end point limits for the noted parameters are ensured only for the conditions as specified in Mil-Std-883, Method 1019.5,
Condition A.
(2) SMD limit of 6mV/V is equivalent to 18mV
(3) SMD limit of 0.3mV/V is equivalent to 120mV
LM117K RH Electrical Characteristics
DC Drift Parameters
The following conditions apply, unless otherwise specified.
Deltas performed on QMLV devices at Group B, Subgroup 5, only.
Symbol
Parameter
Conditions
V_O
Output Voltage
V_RLine
I_Adj
Line Regulation
Adjust Pin Current
V_O (Recov) Output Voltage Recovery
V_I = 4.25V, I_L = -5mA
V_I = 4.25V, I_L = -1.5A
V_I = 41.25V, I_L = -5mA
V_I = 41.25V, I_L = -200mA
4.25V ≤ V_I ≤ 41.25V,
I_L = -5mA
V_I = 4.25V, I_L = -5mA
V_I = 41.25V, I_L = -5mA
V_I = 4.25V, R_L = 0.833Ω,
C_L = 20µS
V_I = 40V, R_L = 250Ω
Notes Min Max Unit
-0.01 0.01
V
-0.01 0.01
V
-0.01 0.01
V
-0.01 0.01
V
-4.0 4.0
mV
-10 10
µA
-10 10
µA
-0.01 0.01
V
-0.01 0.01
V
Sub-
groups
1
1
1
1
1
1
1
1
1
Copyright © 2006–2013, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Links: LM117QML LM117QML-SP