5962R9951705VXA Datasheet, PDF (11/36 Pages) Texas Instruments – LM117QML 3-Terminal Adjustable Regulator

LM117QML, LM117QML-SP
www.ti.com
SNVS356D – MARCH 2006 – REVISED APRIL 2013
LM117H & LM117WG RH Electrical Characteristics
AC/DC Post Radiation Limits @ +25°C⁽¹⁾⁽²⁾
Symbol
Parameter
Conditions
V_O
Output Voltage
V_RLine
ΔV_I / ΔV_O
Line Regulation
Ripple Rejection
V_O (Recov) Output Voltage Recovery
V_I = 4.25V, I_L = -5mA
V_I = 4.25V, I_L = -500mA
V_I = 41.25V, I_L = -5mA
V_I = 41.25V, I_L = -50mA
4.25V ≤ V_I ≤ 41.25V,
I_L = -5mA
V_I = 6.25V, I_L = -125mA
E_I = 1V_RMS at f = 2400Hz
V_I = 4.25V, R_L = 2.5Ω,
C_L = 20µf
V_I = 40V, R_L = 250Ω
Notes Min Max Unit
1.2 1.35
V
0
1.2 1.35
V
0
1.2 1.35
V
0
1.2 1.35
V
0
-25 25
mV
60
dB
1.20
1.35
0
V
1.20
1.35
0
V
Sub-
groups
1
1
1
1
1
4
1
1
(1) Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the "Post
Radiation Limits" table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect.
Radiation end point limits for the noted parameters are ensured only for the conditions as specified in Mil-Std-883, Method 1019.5,
Condition A.
(2) Low dose rate testing has been performed on a wafer-by-wafer basis, per test method 1019 condition D of MIL-STD-883, with no
enhanced low dose rate sensitivity (ELDRS) effect.
Copyright © 2006–2013, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Links: LM117QML LM117QML-SP