TS3USB3200_16 Datasheet, PDF (12/23 Pages) Texas Instruments – USB 2.0 Applications

TS3USB3200
SCDS333B – JUNE 2012 – REVISED JULY 2016
www.ti.com
Typical Applications (continued)
8.2.1.2 Detailed Design Procedure
The TS3USB3200 can be properly operated without any external components. However, TI recommends that
unused pins must be connected to ground through a 50-Ω resistor to prevent signal reflections back into the
device.
8.2.1.3 Application Curves
Figure 11. 480-Mbps USB 2.0 Eye Pattern With No Device
Figure 12. 480-Mbps USB 2.0 Eye Pattern for USB Switch
Figure 13. Eye Pattern: 0.7-Gbps MHL Eye Pattern for With
No Device
Figure 14. Eye Pattern: 0.7-Gbps MHL Eye Pattern for MHL
Switch
Figure 15. Eye Pattern: 2.2-Gbps MHL Eye Pattern for With
No Device
Figure 16. Eye Pattern: 2.2-Gbps MHL Eye Pattern for MHL
Switch
12
Submit Documentation Feedback
Copyright © 2012–2016, Texas Instruments Incorporated
Product Folder Links: TS3USB3200