TS3USB3200_16 Datasheet, PDF (1/23 Pages) Texas Instruments – USB 2.0 Applications

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TS3USB3200
SCDS333B – JUNE 2012 – REVISED JULY 2016
TS3USB3200 SPDT USB 2.0 High-Speed (480 Mbps) and Mobile High-Definition Link
(MHL) or Mobility Display Port (MyDP) Switch With additional SPDT ID Select Switch and
Flexible Power Control
1 Features
•1 V_CC Range: 2.7 V to 4.3 V
• Mobile High-Definition Link (MHL) or Mobility
Display Port (MyDP) Switch
– Bandwidth (–3 dB): 5.5 GHz
– Ron (Typical): 5.7 Ω
– Con (Typical): 2.5 pF
• USB Switch
– Bandwidth (–3 dB): 5.5 GHz
– Ron (Typical): 4.6 Ω
– Con (Typical): 2.5 pF
• Current Consumption: 40 µA Typical
• Special Features
– Flexible Power Control: Device Can be
Powered by V_BUS Without V_CC or by V_CC Alone
– I_OFF Protection Prevents Current Leakage in
Powered-Down State (V_CC and V_BUS= 0 V)
– 1.8-V Compatible Control Inputs (SEL1, SEL2,
and PSEL)
– Overvoltage Tolerance (OVT) on All I/O Pins
up to 5.5 V Without External Components
• ESD Performance:
– 3.5-kV Human-Body Model (A114B, Class II)
– 1-kV Charged Device Model (C101)
• Package:
– 16-Pin UQFN Package (2.6 × 1.8 mm, 0.4-mm
Pitch)
Switch Diagram
D+
D-
ID_COM
SEL1
VBUS
VCC
Control
Logic
Switch
Power
USB+
MHL+
USB-
MHL-
ID_MHL
ID_USB
SEL2
PSEL
2 Applications
• USB 2.0 Applications
• Mobile High-Definition Link (MHL) Applications
• Mobility Display Port (MyDP) Applications
• Mobile Phones
3 Description
The TS3USB3200 is a differential single-pole, double
throw (SPDT) multiplexer that includes a high-speed
Mobile High-Definition Link (MHL) or Mobility Display
Port (MyDP) switch and a USB 2.0 High-Speed
(480 Mbps) switch in the same package. Additionally
included is a single-pole, double throw (SPDT)
USB/MHL or MyDP ID switch for easy information
control. These configurations allow the system
designer to use a common USB or Mico-USB
connector for both MHL/MyDP video signals and USB
data.
The TS3USB3200 has a V_CC range of 2.7 V to 4.3 V
and also has the option to be powered by V_BUS
without V_CC. The device supports a overvoltage
tolerance (OVT) feature which allows the I/O pins to
withstand overvoltage conditions (up to 5.5 V). The
power-off protection feature forces all I/O pins to be in
high impedance mode when power is not present.
This allows full isolation of the signals lines without
excessive leakage current. The select pins of
TS3USB3200 are compatible with 1.8-V control
voltage, allowing them to be directly interfaced with
the General Purpose I/O (GPIO) from a mobile
processor.
The TS3USB3200 comes with a small 16-pin UQFN
package (2.6 mm × 1.8 mm in size), which makes it a
perfect candidate for mobile applications.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TS3USB3200
UQFN (16)
2.60 mm × 1.80 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.